3 wire anti tamper stop solenoid HELP LOL

i tryed it and i cant hear any clicking noise at all even with a live ran straight to it

its quiet hard to access the bolts though james

bigg1115 said:

i tryed it and i cant hear any clicking noise at all even with a live ran straight to it

Click to expand...

running a live to it wont work only once you get to actual solenoid ,otherwise it wouldnt be much of an anti theft device

lol good point james

also James what would happen if i accidentally slipped and smashed the black box, am i right in thinking it wouldn't matter anyway as i could just live the solenoid once the box is ov of the way?

bigg1115 said:

also James what would happen if i accidentally slipped and smashed the black box, am i right in thinking it wouldn't matter anyway as i could just live the solenoid once the box is ov of the way?

Click to expand...

as you say just put live on solenoid ,they dont look pretty by the time ive chisled them off but your never going to refit it

cheers for all the info james if your up this way i will get you 5 pints hahaha

just a quick update lads.. i managed to get the cover off now i see a sinlge wire stop solenoid, i ran a live from it to the battery and it made a clicking noise, which wasnt present before so im assuming it must have been a immobiliser problem, i havnt had time to try start it as the battery was dead, its on charge now so i will try fire it up tommorow, will i be ok to just live it straight to the battery while i try and fire it up, also when im bleeding it off using the lift pump to prime it will the solenoid need to be lived off ... thanks for all the info lads.

Well lads thought id let you's no it started straight away with a live straight to the battery,
apart from one of the metal pipes i hadn't realized id smashed when i was chiseling the cover off the stop solenoid, everything's good.... so thanks a lot i couldn't be happier and i would have been fooked with out this forum lol...

bigg1115 said:

Well lads thought id let you's no it started straight away with a live straight to the battery,
apart from one of the metal pipes i hadn't realized id smashed when i was chiseling the cover off the stop solenoid, everything's good.... so thanks a lot i couldn't be happier and i would have been fooked with out this forum lol...

Click to expand...

good news then

Now feed it off a live on the ignition and you are good to go

jamesmartin said:

good news then

Click to expand...

thanks james mate cant wait to go out in it just need a pipe for it lol

will do bio landy, thanks fella

Well lads all is well my new spill return pipe came today, fitted it and now is all good ... big shout out to all of you .. and this forum ... id have scrapped it by now if it wasnt for yous lot lol

got there in the end

yeah jame thanks fella ... over the moon like lol