Switch location and blanking plate removal

[Dangermike]

Hey guys

I have purchased a switch which I intend to wire up my spot lights with, but with out buying a whole switch pod I have been trying to think of the best location,

This is said switch

And I was thinking about using the blank on the opposite side to the head light level switch.
But it seems to be a bit of a pain to get out, has anyone removed or before?

Any other locations you would use?

Thanks!

 

[cliky]

why not just buy a fog light switch off Ebay there cheap enough!:

LANDROVER FREELANDER REAR FOG LIGHT SWITCH | eBay

Then mount it in its normal position?

 

[Duncp73]

Hey guys

I have purchased a switch which I intend to wire up my spot lights with, but with out buying a whole switch pod I have been trying to think of the best location,

This is said switch View attachment 39898

And I was thinking about using the blank on the opposite side to the head light level switch.
But it seems to be a bit of a pain to get out, has anyone removed or before?

Any other locations you would use?

Thanks!

Put mine in the same place, I prised it out carefully with a small screwdriver. I still caused a little damage.

 

[Dangermike]

why not just buy a fog light switch off Ebay there cheap enough!:

LANDROVER FREELANDER REAR FOG LIGHT SWITCH | eBay

Then mount it in its normal position?

Mainly because my spot lights have angel eyes, so would like 2 separate switches

 

[DuncanS]

Why not get the auxiliary lighting switch set? http://www.landroveraddict.com/users/winu/photos/the-freelander-osc/3641206301029442b.jpg Picked mine up at the scrappy for £2.

 

[baptista]

why not on the oposite side of the headlight height aim adjuster switch?

 

[Dangermike]

Why not get the auxiliary lighting switch set? http://www.landroveraddict.com/users/winu/photos/the-freelander-osc/3641206301029442b.jpg Picked mine up at the scrappy for £2.

That does look neat! I haven't seen any freelanders in my local scrappy but I might have to have a proper look!

 

[Dangermike]

why not on the oposite side of the headlight height aim adjuster switch?

That's where I thought of first, but trying to figure out how to remove the blanking plate with out damages

 

[DuncanS]

For the guys with 3 doors and the ****ty sunglasses holder, I have this http://www.landyzone.co.uk/lz/f9/useful-switch-panel-3dr-owners-196238.html

 

[DuncanS]

Oh by the way the official parts number for the switch kit I pictured is STC7944 available here: http://www.brit-car.co.uk/product.php?xProd=168694