Diesel Do
Well-Known Member
- Posts
- 5,213
- Location
- Nottingham
48inch
Yer but no but a toffee filled vcu would be betterer than chocolate shirly?
Go for the eclair. Chocolate toffee combo. Can be adjusted to suit varying conditions.
48inch
Yer but no but a toffee filled vcu would be betterer than chocolate shirly?
just noticed this........ there's no difference in rotational speed on road, the back wheels will be turning at the same speed as the front. The point is this situation the back wheels aren't being driven by the rear diff they are driving the diff. No matter what resistance there is in the VC it is causing drag not drive.But it's the friction from the heat produced as the liquid is agitated through slip that makes it 'stickier', if you like. Yes, there is a difference in rotational speed between the front and back wheels, the back wheels turning faster by a marginal percentage, and even if this small difference warms the liquid, its the temperature above a certain level that makes the liquid nearly solidify, not just the fact that it gets warm. Apparently, although I've not had a chance to experience this yet, but the vcu gets very hot when this happens.
ask away im very patientwell, you keep telling peeps what size tyres to fit on a disco and why petrol hippoos "cant be as bad as that" and where peeps can find green lanes, James. Yu will get sick and tired of repeating yoself ad-naseam.
Me - this is an interesting enuf site with lots of original discussions to keep me happy, without the repeat Q's.
I am sure yu wont mind having all the dumb-arsed repeat questions put in your direction
have yu read the definitive guide to VCUs in the FAQ section? it even comes with pics
don't know why they thought it would be better to give it a front bias.Here's a good question (I think) if, on Tarmac with no wheel spin, it drives the front wheels only and just drags the rear around, this makes it behave like a front wheel drive slush box! Yes? spose so The vcu wouldn't need to do anything, yes it still has to slip to prevent transmission wind up and it'd be front wheel drive! With all the soggy characteristics this seems to be the theory! So my question is, why did they design in a ratio difference to make it behave like a front drive car when you're all saying its front drive not four wheel drive? Answers on a post card
don't know why they thought it would be better to give it a front bias.
The thing is the difference in ratio is/was only 0.8% so the slightest scrubbing of the front wheels particularly in a turn is enough to allow prop speeds to alter and bring in the rear as a driven axle.
merely turning a corner could do it too, because the inner wheels would be going slower than the outers
exactly , hence the excessive tightness on full lock when the VC is passed it best.merely turning a corner could do it too, because the inner wheels would be going slower than the outers
wont necessarily affect front/rear bias. thats what a diff does.
true wouldnt thats done in front and rear diffs ,the bias would come in that rears take shorter trackwont necessarily affect front/rear bias. thats what a diff does.
Is that when the chocolate's out of date?exactly , hence the excessive tightness on full lock when the VC is passed it's best.
Welcome To LandyZone, the Land Rover Forums!
Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.
Registering is free and easy just click here, we hope to see you on the forums soon!