Hi P3cca, im in Evesham, about 10 miles from Alcester/Startford on Avon. Im about most of tomorrow as well, would be good to catch up. Will send a PM later with my mobile number! Tom

hI p3CCA, You should easily be able to fit 2 075 batteries under the passenger seat. These have easily enough power to ran a landy, but are quite small and compact. Ill have to pop over when you are back in Alcester and say hi! Tom

Hi guys, It was me that was organising the land rover meet in Evesham, we had a couple last year, very successful meets with around 20-25 vehicles each time. Would be good to get some more as well. Thanks for the mention chunkymunky! Due to the early darkness at the moment, I will be...

Awesome, thanks chaps! Tom

Hi all, Could anybody please advise me on the differences in a 110 chassis. How is a CSW chassis different to a standard utility chassis? Do the B post pillars bolt on to the chassis or are they welded? If I could pick up a standard 110 chassis, what mods would it need so that it would fit...

I organised a pub meet in Offenham at the Fish and Anchor Pub. It ran from March to October last year. We had an average 25 vehicles on each occasion. There are plans afoot to rekindle this meet in March when it gets a little lighter, would be great if some more of you could come along! Tom

So just to confirm, I will be able to use a 2.5TD starter motor to start a 200tdi engine? Thanks Tom

Welcome from another Evesham lad. Im over near Offenham. I drive a series 2, and also have a 1993 disco that may/may not be rebuild. What year is your rangey? Tom

When I first bought my first land rover, I stupidly went out and bought a brake rebuild set from paddocks, supplied by britpart... Needless to say, not impressed. The bores in the wheel cylinders were scored (which they blamed on me - they hadnt even been fitted at that point!) The snail...

Nah, the one I picked up today was FOC, off a mate. Would just like a good working one!

Still looking... Picked up another one today which also doesnt work!

Not sure if you saw this? Thanks Tom

Do you happen to have the frames that fit the front seats to the floor? Im after a passenger one as mine has snapped? Tom

Hi all, Wondered if anyone can help. The small dog within the front of my 200tdi starter has lost most of its teeth and now does not mesh with the outer cog. Does anyone have a reasonable 200tdi starter or a burnt out starter that I could have to salvage the parts off. The cheaper the...

Thought as much, thanks for the advice gents! Any idea how I would go about tracing a battry drain? As soon as I connect leads, the battery slowly loses voltage. 0.01 every 2/3 seconds..? Thanks Tom

So, I wondered if I could ask for some help. Vehicle electrickery is not my strong point (very little is!) On my 1993 discovery 1, I have a relay screwed into the front O/S wing. Out of the relay, I have 4 wires. One of them, I presume, must go to an earth. Now there is a black wire, coming...

Hi there, Could I please take the beige mats off your hands? Many thanks Tom

Hi Darius, I am in Evesham, and I have a very tidy and original 88 hard top. It is completely undented. The paint has worn thrugh to ally in a few places, only through age, but really is is great condition. It has the solid sides, but they are easily swapped if you were so inclined. let me...

As I said, I haven't got the vehicle back here yet, and as such, havent been able to check either the front wheelarch or the number in the screen. I see your point Uncle Albert, but surely that is a massive coincidence that the front end was changed for another with EXACTLY the same serial...

OK, So a slight update. The reg number of the vehicle has (very very kindly) been checked by a member of this here forum on the microcat system. The microcat system has the same VIN number as is stamped on the vehicle, except the only difference is that the age mark is represented as a K, not...