Really appreciated, I will check that whenever it stops raining over here.

Great, thanks.

Going straight to high.

Yes, I have the MoD Hand Book which includes the wiring diagram, however, I don't see the Stabeliser in it. I have doubled checked the wiring and tried a new sensor in the cylinder head.

Hi all. I have a 1984 109 FFR 24v. The Fuel and Temp guages are both faulty. I searched the Forums for this issue and it appears that the Voltage Stabeliser is faulty. The wiring diagrams show this, however I cannot find one on my dash as indicated. Is it located somewhere else or is there some...

Bad earth causes all sorts of wierd and curious problems.

I have the same 24v FFR. Don't know what your problem is exactly, however, I bypassed the IR Relay and just use the 6 way switch for standard parking and main lights. Just two positions used in the switch.

Thanks.

Thanks for reply, however, starter knackered.

Hi all. Is it possible to tow start a 2001 Freelander 1 Automatic. Regards. Chris.

Lucky you are not in Ireland. It costs me more for 3rd party only on a 1979 109.

Good one. Maybe I could do with some.

I may just have been lucky I guess.

Something wrong, this should just slide on and clear the hole without any problem.

Fair dues to you. However, don't think I am up to that now. Thanks anyway. Take care.

What did you do with the brakes.

Thanks for all that. It is not so much that the steering is heavy as after 15 years I am well used to it, it is just that at 72 my arms are not as good as they used to be and anything that would lighten it would help. I want to keep it as original as possible. Very best regards. Chris.

The relay was dry, however I filled it before I installed it.

7.50 - 16 Tyres. 30psi. All steering componants new.

I have completely rebuilt it ftom the ground up. It is going beautiful, howevet I jave pretty severe artritis in my arms and back and want to just lighten it a bit. I have replaced springs all round. Two leaf parabolics front and rear. Kept the original shocks. Perhaps this might be a problem...