It's a manual :confused2:

Hi, Noticed a hissing noise coming from the engine bay, and when I checked found a small rubber hose had split. The hose goes into a t-connector into what I assume is the vacuum pipe for the brake servo. I traced the smaller hose back and it appears to go through the bulkhead. I've done a...

Bit of a generic question but does anyone know of any scrap yards in or around Buckinghamshire that may have a discovery 1 drivers seat in it? Been searching or ages but can't seem to find one anywhere, even eBay doesn't seem to have much on it for the early 200tdi's

Turns out you guys were right! Once I found the right place I opened it up and found...... One broken fusible link wire! Connected the two ends together to test and everything is back to working! I hope that someone else in the future finds this thread useful! Thank you for your help guys!

Is this where you mean? Long cable covered in fabric?

Ok thanks will have another look for the fusible links today.

The mysterious box under the fuse box. The broken wire leading into this box

Managed to add pictures....to follow

Thanks for the replies, Discool where is the main wiring harness? Looking at the info I have seen on the forum, including the link from sierrafairy it says the fusible links are in the positive lead? I am hoping you are right and I can find the fusible link, somewhere! I have felt along...

Hi, I have been working on an electrical problem for about a week now on my k reg 200 tdi discovery. Some of this info may not be relevant but just in case here is what happened and is happening. My lands was sat parked up for a couple months awaiting an mot, was periodically running it...

cool thanks again for your prompt replies at least its a straight forward fix and i'll get it done soon so no more coolant patches on the driveway :-)

ah rite cheers for the reply so does that mean that the pump has to be replaced or can the seal be replaced on its own?

Hi, I have an annoying leak from my 200tdi K reg disco. At first I thought it was from the water pump gasket, so I changed that. I then noticed there was still a leak from what I thought was around one of the bolts at the bottom of the water pump, so a dab of locktite on there and still no...

Just a quick question....whats a rad blind?

Theres a landrover parts speciliast place up in Downley called Dingocroft you could also try there

looks good where is it?

ive been trying to bleed it using the plug on top of radiator, and all the pipes i can feel are hot, is there still more i need to do?

all completed and matrix in place, however with my clumsy hands i managed to break some flap control rods and flaps in the blower distribution unit. So dashboard will have to come out again another day when money time and weather permits replacing that! Broken bits aside tho, the heaters...

cool thanks that worked but i forgot to reply, got the new matrix in but heaters not hot?

ah rite cool, I have bought a pack of assorted split pins just in case as I was in Halfords. Is there any other jobs i can take care of whilst the dash is out? or is it more a case of "if its not broke dont try and fix it"