Sorted the torquing problem short 1/2 inch extension with hole for side bar from a car boot sale bit of rod fastened through the box spanner and extension bar Nm - ft/lbs no problem No icon for blowing me own trumpet

Just done all the springs on my disco All 5 doors as one went, then the other Instructions are clear and easy to follow, just be aware that they are 'handed' springs, but not an issue as they come sellotaped to the instructions in small bags for the correct side LRO last month also covered...

1.Dan_vtec 2. sflying123 3. sflying123 4. Elmer_d 5. 6. 7. 8. 9. 10.

Thanks for the replies basically clean both threads and do them up as tight as possible with thread lock using a 14 mm spanner The bolts in question are the seven that hold the swivel housing to the axle (between number 20 and 24 on the picture) Nether RAVE or Haynes shows any way of getting...

Simple question How? I have new swivel ball joint on order and plan fitting this weekend. Fine so far I've had a look at the job already and one thing I cannot figure is how do you torque up the bolts that hold the swivel joint to the axle. Thread lock on them etc. no problem but no room...

Got General Grabber AT2's on me disco I have had no trouble with them, get me through the mud, snow and forest trails etc. and no hairy moments on the road yet either

Did this on my mates Defender, used copious amounts of heat on bolt and block, but I used the metrinch spanners, I think Halfrauds do them, the type that grab the sides of the nut / bolt head instead of the corners. Well worth the investment in a single socket of correct size and saves rounding...

General grabber AT2's on mine as well, but BF Goodrich's are worth a look as well Either will do what you are asking for

My Disco did the same as yours, after a long run and clutch in to change gear or junction etc. oil light on, revved it. oil light off Simple fix was a new oil pressure switch from Paddocks,

Count me in for a set of 5 door ones, with jack tube on/in them

That is exactly what I said! I still don't belive it even though I use it I'm Victor Meldrew every time I put the beeper to my head and press the button

Mines just the same, but the Top Gear tip really does work, I was very sceptical, hold the beeper to your temple and press the button, range increases to about 50 ft

From RAVE Multi–Function Unit (MFU) The multi–function unit (MFU) is mounted on the rear of the passenger compartment fusebox and has an input to operation of the following:
Heated rear screen
Heated front screen
Courtesy lights
Side and headlights
Rear fog guard lamps
...

DON'T PANIC Not the "What can I fit question AGAIN" :p I'm looking at new tyres for Elmer, searching interweb for prices etc came across this which is very good, so thought I would add it to the other calculators on here Tyre Calculator - Alloy Wheels The existing ones I have been...

Any will fit the hole and wiring is a bit of leccy work to the indicator bulb and tail light. I have a 98 300 TDi just went to local breakers and acquired myself light units with indicators incorporated, if you're lucky as I was the connectors were the same and it was a straight swap and plug...

Eh don't knock it I love these people I sold my MG on auto trader and got 5 responses from people telling me they were a 1/ dutch naval officer 2/ belgian business man 3/ german doctor 4/ etc 5/ etc all with @yahoo.co.uk email addresses All wanting me to accept more money than car was...

No wiring required, 300 and 200 use the same connectors, or at least did on my '98 300, unplug and replug them in, 4 X indicators and 4 X tail lights instantly. even use the same lamp and holders, just need the indicator lamp and holder, local scrap yard visit I have 2 X 300 rear tail lights...

This is a 300tdi, and you have the 300 tdi rear light cluster Confused me as well Top bulb IS a dual filament stop / tail light but only the stop element is connected, the tail light is in the bumper The hole / missing bulb is where the indicator bulb would fit if you there was one, but you...

Hi You can find the full instruction manual for the Panasonic stuff from the Panasonic web site, your instruction manual is on there. Your unit is basically the same as the one that I had in my disco. your manual is...

Buster bus If you want an archery or clay pigeon shooting competition near York just let me know! I can arrange that, courtesy of another Landy owner. It would cost about £30 for a full day's shooting, gun hire and clay's. Does a bucking bull ride as well, that is just sooooo funny. :rolleyes: