HIPPO the videos look good but can i ask any mods or what kind of tyres you were running only had my 2000 td4 for just over 6 months and played last week on n york moors on road tyres in the snow i was amamazed how well it performed and i have owned a modified disco. freelanders do deserve the...

thanks for all the info turned out to be the temp sensor just wired it to a switch as posted by willo all works fine now and cheaper than a new sensor

Probably a tappet thats worn if lucky when my td4 suffured oil starvation every thing had gone big end 1&2 cylinder and crank 1 badly scored bore not worth the cost of rebuilding cheaper to buy used low milage engine get it checked properly before you spend. mine only sounded like a cortina...

Had that problem with a citroen a few years ago turned out to be a damged Reluctor Ring the notches on the drive shaft that abs sensor monitors.No comments pls it was the wifes

thanks for the info, will try all this weekend, me id prefer the spider dunt involve nicely fragranced little plastic bags!! will post results thanks again

My bloody alarm keeps going off for no reason only started 2 days ago never done it before, 2000 td4 neighbours starting to moan has any body got any idea thanks

Thanks for that willo just done the fbh mod today after a failed sensor seems to work perfectly and a bit of wire and a switch has left my bank ballance intact for once. thanks again

My 2000 td4 gs with 104000 miles must be old because when i tried to buy a gasket from my local main stealer, guy salmon wakefield parts dept, the reply was are you sure its a 2000 we didnt build td4's until 2001!!! i dont go there any more!

I am sure rear toe in toe out is adjustable just like the front tracking as commonly known.Get a 4 wheel alignment done can be pricey but tyres are not cheap

Thanks for the useful info no 3 fuse not supposed to be there then

The fbh is there and would rather have it working as it should because belive it or not every thing else on the car works properly and it dont leak.Ill put the missing fuse back in and after that the fuel pump sounds a good place to start cheers

i would like to know what the empty fuse slot is for before i plug one in and no davec its never worked while ive had it but this is the first cold spell i bought it in june thanks

HI again every one just have a question about the none working fbh on my 2000 td4 where do you start with finding the problem? and after a quick check in the engine bay fuse box i noticed fuse 3 and a relay both down as engine managment are missing could this be anthing to do with it or are they...

Anyone ever taken a freelander round tong had it a few months and thought that site might be to much for it from what i remember. but there again that was 25yrs ago with the pennine LR club

Hi, engine breather definately worth doing should be done every service in my opinion. Rocker cover gasket should be straight forward but will take a while. Remove Injector pipework take injectors out and hope none are stuck then remove inlet manifold clean inside while its off ,and then you...

WHY CAN'T I LEAVE THE MAF UNPLUGGED? Some owners have been advised that its okay to just leave the maf unplugged. This is not a good idea for the the following reasons: a) Not only is there no air flow measurement, but no intake air temp sensing either so the ecu defaults to -5C. This...

update, Cola & power washed it, was still full of gunge. Oven cleaner & power wash more or less spotless.Its like driving a new fooking car! cant believe it and this engine had only done 28000 miles. The kids didnt want the coke after dont know why! thanks for all your advice.

My understanding of a pieburg is they dont work right on a standard car (I could be wrong), you need a box o tricks from rover ron, give them a ring apparently they know what their talking about and I will certainly be talking to them when I return from my jollys Tuning-diesels for cheaper...

Thanks guys gonna go down the cola route. wil post how it works, if it dont work it will be from bucket back to bottle and the kids will love it.Well there is a credit crunch

I had the same problem with mine after fitting a used 28000 mile engine. Fitted the maf from my old engine, pulls from low down now, sorry not sure on revs though. Try unplugging it you should notice the difference if the maf is on its way out.