Found the part - ANR 1118 and yes its a classic part. As far as I know he's followed the instructions to the letter as well as dragging one of the older techs from the main dealer (which just happens to be opposite) and nothing doing. 3 calipers bleed fine the fourth just won't. We'll get the...

Can anyone shed any light on this. 94 LSE softdash Car working fine, no abs problems that I was aware of. MOT man failed a stretch of brake pipe so took it in to be changed. Garage is a one man band but fairly RR friendly. Now he can't get any fluid out of that rear corner. One side bleeds fine...

If you want a look at another LSE for comparison I can't be too far away. Drop me a line. I'm biased but I much prefer the longer wheel base even though usually I drive it on my own. Alternatively if you don't go for it let me have the details please. Thanks

My drivers Cl has given up. Took the door card off and if you manually pull/push the arm to operates the other doors too but will not operate itself. I'm assuming the unit itself has died and its sealed so get another. Bought one of ebay of the correct fitting (from our sponsor no less) only to...

My OEM Clarion radio seems to have gone up the swannee. Suddenly it keeps asking for the code and when entered I just get a pop from the rear sub and the it goes off again. Clearly power to the HU and occasionally I get a TUN ER98 error code on the radio. It will play the CD but very quietly...

Steve, I've asked them which one to use as the 4.2 is not the same as the 3.9 http://www.realsteel.co.uk/section1.pdf Certainly well priced.

Most places have ERR5295 on their sites but you can't get one. LR have confirmed its long gone. Kent cams H180 has been suggested and Real Steel have been mentioned by more than one person.

Real Steel have been mentioned by more than one person so might be worth a call. Local LR dealer confirmed ERR5925 is NLA but they can supply another part non OEM though. I'd hope it would be ok. Kent cams H180 has been suggested. Still not quite sure where to go.

It looks like OEM ERR5925 is now not available. Looks like mine is going to need doing so I shall do cam, followers, rockers, timing gear etc but can anyone suggest which of the myriad of kits out there might be half decent? Piper seems to divide opinion. 270?

It seems that oem 4.2 camshafts are NLA. So what to buy and more importantly what not to? Any suggestions?

Thanks James - about spot on what I've been quoted.

Oddly I have, but I'm just trying to gauge how reasonable or otherwise the quote is... Someone may have done similar recently.

I should have been clearer, supplied and fitted.

Looks like I need cam followers done - engine is rattling like a good un all of a sudden. Tried a bottle of Wynns follower remedy but its maybe a little better but barely. So as I don't have a bill for a cam in the paperwork that came with the car it makes sense to get it all done together. So...

Steering wobble - swivel preloads. Proper scary at 60+mph! First time I thought the world was coming to an end.

This is starting to play up. Front doors were fine but now the drivers side won't operate on the fob, passenger one will. But the passenger one will operate if I manually push/pull the drivers door plunger. So is it the actuator in the drivers door at fault? Alarm works fine.

Found a brown one - bit lighter than Brian's. A bit of an afterthought though as the dash is still grey 1995 Range Rover Classic for sale - Classic car ad from CollectionCar.com.

But Brian that's a hard dash. I know there are a few colours for the hard dash ones but what about the last few soft ones? I like the brown interior but I've never seen a soft dash in brown (or anything else)

Are they all grey? I don't think I've seen another colour.

Yes, fiddled with that, pulled it forward as far as possible. The hatch seems to push home but the catch won't take - there seems to be no closed position