Ok cheers! Do you think around £100 for a second hand pair in decent nick sound about right?

the tops on paddocks are around £20 and the bottoms are £40 without VAT and they don't come with glaze so i suppose up to £100 for a decent second hand pair? Does that sound too much? cheers again!

I posted this on the general chat but thought i'd post it here as well! How much would a pair of series 3 doors in good condition be worth? I ask because i'm on the look out for a new set and there are a few shows coming up soon so i want to know how much i should be looking to spend. Cheers.

How much would a pair of series 3 doors in good condition be worth? I ask because i'm on the look out for a new set and there are a few shows coming up soon so i want to know how much i should be looking to spend. Cheers.

i need to do some bulkhead repairs on my 90. it needs a new passanger side footwell and drivers side door pillar. Where is the best place to get these from? and whats the best way to go about replacing the old door pillar and how do i go about taking out the old one? Any advice would be great...

Cheers just had a browse and found the flo-flex kit for around the £60 mark and the blue polybush kit for about £110 which is quite a lot of difference! lol so i'm not sure which is the better make anyone got any expereince using either of theses two kits? Cheers James

I'm thinking of replacing the old bushes on my 90 as they are quite worn. I was thinking of putting in polybushes and just wanted to know everyones thoughts on them? Do they give a better ride than the genuine rubber bushes? and which is the best set of polybushes to get, i have heard superpro...

I need to do some repairs to my 90s bulkhead. i need to put on some new door pillars as the old ones are badly corroded does anyone know where the best place to buy these is? And has anyone had any experience ddoing this replacement, i was thinking leave the bulkhead on the chassis and weld the...

Thats a really good finish storm! what sort of roller did you use? and how durable is it, does it still have a good finish to it after a while? James

wow they are some fantastic results with the roller! Was it any particular brand of paint used?? and how many coats of paint did you do to get that sort of finish? Many thanks, James

I'm rebuilding my 90 and when the time comes i will paint the bodywork but i'm wondering whats the best way of doing this without having to spend a fortune? i've heard of people using rollers to paint their landrovers and have said the finish is quite good? Also what paint does everyone...

I am doing a rebuild off my landrover 90 td and i am going to steam clean and pressure wash the engine and gearbox as a complete unit i was just wandering is there anywhere on them where i should avoid getting the water in? Cheers, james.

I'm doing a full rebuild on a galvanised chassis so it has to come off lol! Do you know what else will need to be taken off for the bulkhead to be removed? Cheers, James

I am about to remove the bulkhead from my landrover 90. Just wandering what is the best way to start? Also what is the best way to remove the electrics? I am removing it because it needs repairs to the door pillars and passanger footwell. Any help would be great cheers guys!

i'm taking to pieces my 1989 landrover 90 ready for a rebuild. I'm just wandering what is the easiest way to take of the front wings? i had a go today but i can't access some of the bolts that attach the wings to the bulkhead? Any ideas would be great! Thanks.

i know this may seem a weird question but would a 19j engine out 0f a 90 fit on a new galvanised landrover 90 200tdi chassis? The only thing that i could think that would be different is that the radiator mounts would be lower? Cheers, James

I have some dents in the tub of my 90 and was just wandering what the best way to beat them out is?? i Know aluminium is hard to work with as it just tends to stretch any ideas would be helpful! Cheers, James

Today i finally got round to doing some more work to the landrover! :) i'm a student so have been working as much as i can over the hols to earn the ££ to pay for the build!! I managed to get the sills off eventually! Who ever thought it was a good idea to use about 8 bolts on each sill?? Lol...

I forgot to say i have heard of a paint called tetrashutz that people have used on their land rovers. Does anyone know if this is any good and where could i get it from??

Hi i am currently restoring my 90 and was just wandering what is the best paint to use on the axles and chassis? Cheers, James.