Thanks mate just read it will give it a go in the morning and let you know By the way if the switch is duff does it mean a new compressor ?

Thanks wammers I will have a look at that but Sorry I can't seem to find the tech archive could you tell me how to get there

hi sorry about the his but could some body please help me I recently changed the glow plugs on the 2.5 dse and everything was fine next day on the way to work slow 35 mph came on the dash and car went down to bump stops I have put nanocom and RSW solutions EAS unlock but have no faults found...

Cheers wammers

Thanks have since found a pipe coming off the fuel filter housing which is going nowhere think it should attach to manifold but not sure where any ideas ?

Hi I have the 35 mph on dash but nanocom won't clear as it says no faults found but it has all the lights lit and is on the bumps any ideas what this could be please

HI wife was driving to work in her 2.5 dse and the car went into gearbox overheat and max 35 mph could this be dodgy battery or sensor do you think? when she got to work she tried moving the EAS and it went up and down fine but was still bleating away at her apparently I assume that that was the...

Thanks for all the advice sorry for delay got it cleared with a piece if wire all good and bled now

Thanks But Could it be the earth as I have night breakers in already but how do you check the earth for headlights

Hi all 2.5 dse headlamps work ok just not bright enough when there are no streetlights any ideas welcomed

Hi I know you have to clear the bleed pipe but what I mean is should I be able to clear by just blowing through with my mouth or do I need pressurised air as I have tried blowing down the pipe but nothing comes out no air or water which makes me think it's blocked Thanks in advance

Thanks I'll check both ends then

Hi all I have changed the coolant in the car and the steps say to blow through the bleed pipe that goes from the rad to expansion tank have tried doing this but does it mean with forced air from a hose or blowing cos If they mean with your mouth mine is blocked as I get nowhere fast

Hi Went out stripped off the calipers I had put on in the first place to check all was OK which it seemed to be then bled just the fronts now have brakes at last so I am sure I hadn't tightened something tight enough first time which seated itself ok second time so thanks for all your advice and...

Hi Ok just spent two hours going through the bleeding of the brakes and as wammers said I was careful to do it by the book step by step still have no brakes though and only have clean fluid coming out of bleeders what am I doing wrong?

Hi sorry thanks for replies yes I did lubricate the O ring going to do full bleed of system in the morning

Hi should brake fluid seep out of a new accumulater as none came out of the one I just fitted was just wondering if this is strange

Cheers

So because I did not do a depressurisation before clamping then removing the calipers how much damage could I have done

I bow to your obvious superiority