So because I did not do a depressurisation before clamping then removing the calipers how much damage could I have done
 
Hi should brake fluid seep out of a new accumulater as none came out of the one I just fitted was just wondering if this is strange
 
Did you lubricate the new O ring with brake fluid before fitting?

He was advised to do so but it really should not make a lot of difference there should have been plenty around in the recess the O'ring goes in. The sort of pressure being exerted should seal the O'ring. OOPs, wrong poster it was someone else i told that. Soz.
 
Last edited:
He was advised to do so but it really should not make a lot of difference there should have been plenty around in the recess the O'ring goes in. The sort of pressure being exerted should seal the O'ring. OOPs, wrong poster it was someone else i told that. Soz.
Early to bed tonight for you mate, you must be tired.;):D
 
Hi
Ok just spent two hours going through the bleeding of the brakes and as wammers said I was careful to do it by the book step by step still have no brakes though and only have clean fluid coming out of bleeders what am I doing wrong?
 
Hi
Ok just spent two hours going through the bleeding of the brakes and as wammers said I was careful to do it by the book step by step still have no brakes though and only have clean fluid coming out of bleeders what am I doing wrong?

Did you follow the step by step instructions in RAVE? Is the pump running? What does the pedal feel like? What lights have you got on dash board?
 
Hi
Went out stripped off the calipers I had put on in the first place to check all was OK which it seemed to be then bled just the fronts now have brakes at last so I am sure I hadn't tightened something tight enough first time which seated itself ok second time so thanks for all your advice and guidance it really is much appreciated
 

Similar threads