I oped the Fuse box and on the Green plug I can see brown stuff. Is that because the fuse box has burned. What is the function of the green plug.?? I also saw burn marks on yellow plug and Blue plug.

hahahaha, well not so hot that the oil get pushed out the breather pipe. Thanks for the info. :doh:

Can anyone please tell me why an auto Gearbox on an 1996 HSE 4.6 get hotter than it should. :?: :?: :?: :?: :?:

I found my Right front air spring dropped one night. Mmm i thought leak on the air spring. So what I did then last night was to lift the Car to offload settings and took out the Air spring Relay under the seat. Then the wheel that looked like it had a leak did not drop, but the other wheels...

Thanks all. Yes car was cold, drove it around the block, put it in Neutral, Took out the dipstick and it was clean, no oil on dipstick. Will do the procedure when oil arrives. Thanks again...

If Gearbox is empty to the dip stick. How much oil do you guys put in. Tested the car in Neutral while idling, dipstick empty????

Problem solved , Thanks, Was water pipe behind Fan

what are the functions of theses multi plugs under coolant expansion tank

Thanks Datatek How does one look/see if the fuse box is not working like it should. :):)

Mmm, That I do not know. i bought the car 6 weeks ago and was told that all the abs units was replaced. I will phone the dealer and ask them. Thank you. The other problem was that My ABS motor run for 15 minutes after I switched the motor of and key was out of ignition. ???? Aish, I hope...

the hooded claw - Thanks for the reply that unit was replaced 7 weeks ago. but what do bug me is that were oil mark around the Accumulator, Where the seal is. Also, is that the Dash board do not display an ABS error. The lights just came up and no ABS. :confused2:

Good Day I please need help on some Electrics. symptoms: Abs, TC and hand brake is on... I was at Dealer and told me only problem they find was the following error: "No power at ECU Pin 1 when ignition is on." Did some trouble shooting and find that Pin 1 on connector C116 witch plugs into...

More Oom JohnP38 :-) I just spoke to Rover Land in SA, and according to him, the message is related to the Pin 1 in the ABS Accumulator Switch. I do not know where this switch is..... :-( He also mentioned that with the gears jumping up and down could be the Selector switch on the gearbox.

Good Day I am looking for the ABS brake Accumulator Switch, Photo or Diagram Please...

aaa dis 'n verassing... :-) Yes the oil in the Gearbox is fine. There was an oil service done less than 5K kilometers back.

I will have a look. thing is when I revved the Rangie, things seems to better... Could this be a problem when the fuse box under bonnet has gone, or burn marks on it.

Just had a look and both fuses are 100%. Any other places to look?

Irishrover It is an 1996 Range Rover 4.6 HSE. symptoms : The car jumps between gears (Auto). i parked the car next to the road, put it in Neutral, give it a nice ref, Then back in to drive, no problem for 5 minutes, then again, gears no gears... Jumps around. The error code , or print...

Good Day I would like to know where to start looking for this problem. "No voltage at ECU Pin 1 when Ignition on" I have all sort of funny problems with my Rangie and would also like to know if this can be related.

The did a pressure test on it. Just replaced the Thermostat , but that was not the problem. Went for a drive. When back at the garage, all hell brook loose. Something give way, and all the water was poooooring down the back of the Rangie - Looked like one big green Waterfall. Mechanics...