well i think the arches are looking good!! boot floor maybe not so bad, but not as bad as the thread you posted redhand

ill be working on it over the weekend if its nice, so ill let you know if i fix it

* goes to get torch to rip carpet out off boot * ill be back with a pics in a min

what about the front door!! the archers are all ok and the car is mechanically sound, ball joints are all ok and the brake lines are all ok, mechanical side of things are great just this mount, and where are these sills?? if you mean under the doors running rear the front, there fine no rust...

well ive found body mounts for £23 each, so guess i can get someone to fit that for me, as for the doors, which seals? the doors ones? atm mines all good, underneath is all healthy either side dont understand why some people are quick to scrap em and are do negative!

so i can get it fixed then its only the one mount thats the problem! if all thats needed is the cut old mount out replace with new one i can get that done

no instead of just righting FAIL . . . you would of said that the first time round?? no??

so help full you tw@ no wonder you have a high post count, useless posts oh im putting hammerite on everything i can see cheers. . . . so any one fancy giving any advice on wether i can get this welded up/ replaced

Basically its MOT time whey. . . now one of my body mounts is rusted through completely, see image drivers side rear mount: passengers side rear mount: Rear bumper/ boot: One wheel passenger side rear: Front mounts drivers and passengers...

alright cheers :)

How hard is it to fit a TD5 with the climate control unit? what would i need, apart from the fascia, what would i need extra under the bonnet etc etc??? would i need an aircon unit? the TD5 is a 1999 s cheers snow

for the rev counter?!

Got the disco out the garage after running out of money for MOT and insurance, got it running fine, but couple of electrical faults have appeared!! firstly, the rev counter doesnt work at all, speedo does work. any ideas?! secondly, the fooking wipers on the front screen wont turn off, yet...

awwww thats nice for you isnt it now, what help was that post to the thread!?!

ah ok, makes sense!! ow hate bleeding brakes lol i know its one of those things that needs doing just **** job, might just leave it till they brake lol

Ah ok, yea got 2" springs and shocks fitted so fitting, lower turrets and mounts without cones can be done!? but better to fit the cones to be safe?! yea they seem to fill the articulation atm, but i will upgrade them, how would i purge the air out of the system though?!! i hate brakes only...

ha ha i did this too. . . .coming back from pay and play, cleaned off the front with the pressure wash at the garage, but the back was full of mud and was lacking a few fins!! new rad sorted out my problems!!

with fitting these should you not fit dislocation cones on the back too?! they drop the shock 2" down so the spring could come out seat at the top? I wanted to fit these at the back and also 2" dropped front top mounts on my disco for better articulation but thought you needed cones too? also...

cut it off!!! new shocks come with own nuts so why care :)

noooo cant do that i like to get as far away from the house as possible then breakdown better that way :rolleyes: