I have 205/80/16 AT's on TSW Tiger 16" alloys on my 2001 td4 S.

or an Android Tablet.

Ralph MOT'D today, 2 advise, NSF track rod end joint, and hand brake just above minimum efficiency. will do both next week when I'm off.

The stuff was like a thick oil, I'll dismantle and get some CV grease and repack the joint. many thanks for your answer.

When taking the front propshaft off, I noticed that there was a small crack in the front joint housing next to the mounting hole and there was lubricant coming out, does anybody know what should go in there when I put a new gaitor and collar on.

Join this forum, it's located in the area you want, lots of us have done these lanes.I'm on as barrym from county durham HOME - NORTHEAST LANERS

I drove a Citroen on hols in spain in June, took me most of the hol to get used to the electronic handbrake.

Diff mounts are a easy job to do, I followed the link on this forum, didn't need to drop the crossmember.

Similar trouble with mine, I took the drums of, stripped and lubed the mechanism, don't forget to copper grease all the contact points between the shoes and the back plate. as stated above the pivots where the cables connected were rusted solid, works like a charm now.:)

Mine is a 2001, small amount of surface rust underneath, if I ever get more than 1 dry day, going to wire brush off and repaint.

Hello my TD4 is on 143,000, having just spent £500.00 on it in the last 12-18 months. It is currently running well if a bit noisy. It is used daily for road runs and 1-2 month on green lanes.

mine was doing this, both of the front ABS sensors were U/S.

my GKN ones from Foundry cost me £40.00

This might be late, i fitted these, told by my local LR dealer they are as good as original LR parts. Land Rover Freelander Propshaft Bearing / Mount GKN x2 | eBay

Why not book a motoring hol, and say you need the kit for the holiday.

I've ordered a repair kit, hope to do this W/E.

Heres the link and info I will use. http://www.landyzone.co.uk/lz/f9/starter-motor-removal-2001-td4-freelander-160882.html

Good luck mate.

My td4 is on a X Plate.

I'll look for some info on RAVE and PM you, My starter is the same, I have bought a replacement selonoid kit for it, see link below. In July issue of LRO mag there is a piece in the repair section showing removing the IRD, and taking the SM out. LANDROVER FREELANDER 2.0 TD4 BMW ENGINE STARTER...