Cheers :) Whats the name of the brushable seam sealer?

I posted this in my main thread but got no reply so ill try here :) Had my first go at welding today I cut out the rusty bits and welded a plate over it rather than but welding it as im just not good enough yet and keep blowing holes and or cant get good penetration. I used weld...

Had my first go at welding today :) I cut out the rusty bits and welded a plate over it rather than but welding it as im just not good enough yet and keep blowing holes and or cant get good penetration. I used weld through primer and painted the bits that i cant get too before welding,ive...

Was the d2 wiper a straight swap?

Hmm i thought but welding was welding with a small gap,i would cut out the rust and butt weld a plate in the hole,it would be flat with the weld ground down. When i say a plate on top with a seam weld it wouldn't be flat because there would be a plate on top of the good metal.

So i've finally got a bottle for my welder so i'm going to have a go at the holes in the footwell at weekend,should i butt weld a plate in or cut out the rust and seam weld a plate over the hole?

Where did you get your pump from?

The loose bearing sound has stopped now but the pilley can still be pulled out a few cm which is causing the belt to squeal.

I thnk my power steering pump has shat itself,I've noticed my steering has been a bit heavy and now the pulley is loose and has been putting pressure on the belt and it sounds like there is a bearing rattling around it in. I've seen a brand new on on ebay for £55 delivered (wolf brand I...

Looks better without the speaker trim.

Looking good :)

lol i like the new additions,i was sure i read the whole thread but where did you get your bonnet latches from?

I only need one so i payed this morning and its getting delivered tomorrow,i will replace the other caliper at some point in the future but its not urgent.

Been looking at getting a new caliper instead of a used one as they cost under £40 delivered. Are they any good or should I look for a used one? DISCOVERY 1 300TDi / V8 94 on RIGHT HAND REAR BRAKE CALIPER SMC500110 | eBay Cheers

That work light is fooking bright!

You need the calipers with the spacers if you want to fit vented discs.

You breaking it because you'll get more money that way?

Do you have vented discs ATM?

Just do it yourself,its easy enough and you will learn a little bit about your landy :)

Windows is normally the window ecu,one of the solder points usually goes to **** or it could be the switches need a clean. When mine wouldn't work it was both :)