Carburetor exchange are who i use they/he does great work

Bob forgot to mention he'd run out of fuel at this point and had to spend half the morning biking to the petrol station and back with a 20l jerry can on his back.....it was an entertaining sight! my poor rangies clutch didnt find towing the 130 too much fun though :(

30mm spacers on standard allys is the same offset as the modulars that craddocks/paddocks sell before i got my 15's i was running 265 insa on white 8 spokes from paddocks and they sat in the arches exactly the same as my slot mags with 30mm spacers :) hope this helps

Looks like an air tank but plastic but yes it will stop your air bags inflating what ever it is

never used them myself i always use delphi pads to be honest

it actually wont drive it gives the effect of a slipping clutch if you try to drive with 1 prop. a series doesnt have a center diff thats why you cant drive with 4wd in all the time

Tyre sizes and offsets wont make a difference to be honest but on a 2 inch lift you can fit up to 33x12.50 r15 on a 90 i think or 285/75r16

ofcourse i do ive got an inch to spare between my radius arms and ive not adjusted the stops. Research before u buy helps :P

you would have to jack all 4 wheels off the floor to get the wheels to spin the viscous coupling is locked in permantly and only allows the front and back to turn indapendantly if a certain break away torque is achieved. You cant run a viscous transfer box without either a front or rear prop as...

Mine steers just fine with the offset rim if they were truely dangerous then do you think they would be being sold? horses for courses i guess you can stick to your biscuit width tyres ill have my offset rims :)

Best way to go they just dont seem to bed in very well and then squeel like a piggy :mad:

doubtful it will do the swivels any harm have you seen how bit the pins are in those bad boys? ill let you know when the wheel falls off the rangie though! :doh:

Or you buy a rim with the right offset and being a 90 they have arch extensions anyways :P

Looks a good un :)

Mintex pads are **** had them in my 300zx they squeeled faded really bad and nearly put me in ditches a few times from faded and grabbing changed to delphi pads had no trouble. Also had them fitted in the rear of a customers 110 hi cap they glazed the dish and squeeled like mad within 200 miles :/

Definatly the clutch arm on the 300 tdis they use a cheap tin arm its very common for them to wear through

Ive got one of those acoustic matts that exmor trim sell in mine its the dogs nuts but friggin expensive think i paid around £300 for mine :(

Hey there peeps! Thought i best post some piccys of my 2 landys My first landy i bought when i was 16 and only just finished 3 years ago (i had built and dismantled it a few times before i was happy with it!) Shes a 1969 series 2a one of the very last with a few parts from a 1973 series 3 i...

Looks a real nice one wish my series looked that good when i got it!

Got one of them at work :P