Modern spray gun use less air than other tools yours should give about 6.5 fad your tools will work but not for to long eg impact gun you could link another tank to your compressor which will give a lot more volume

3/8 should be fine for your compressor any bigger and it is just not supple enough in tight spaces 1/2 is not much smaller than what they use for road drills on 600 cfm compressors for what you want to you want to use it for the 14 cfm vee twin direct drive compressor would have been a better...

If the compressor comes with PCL air line connectors change them for high flow ones which have about an 8mm bore PCL are about 5.5 to 6mm volume is more important than pressure the less restriction you have the better

How about a powerflow custom made job you tell them what you want and they make it eg sound,looks,performance and it is all done on the car 4 oval tail pipes might look nice

I agree get the oily bits sorted first then do the paint at least then people can admire it going down the road all working and nice and glossy

Why not drill the plate to take a 6 or 8 mm compression fitting for the plastic pipe and held place backing nut

A nice paint job would be good to look at while you are working on it but if you ding or scratch it when sorting the other issues you won't be very happy

Back again remembered had this issue with a freelander away for a week back to a flat battery this was an 07 which i had from new It was still under warranty so back to the dealer had it fixed turns out it was the fan module I think land rover where still under ford control back then and they...

With reference to the sound system staying on this happens on my p38 when i take the key out but only for a few seconds so i wonder if there is a delay relay in the system that may be faulty Normally the the power feed is from the first click on the key switch in turn was fed direct from the...

if the battery is not a sealed for life jobby BATAID tablets will help keep it in good nick

machine mart sell a good tool for removing door card studs which if used with care will leave them card as they are quite prone to breaking, and they are quite expensive for a little piece of plastic

Hi had this problem with my SAAB 900 started around 50 and was still there at 85 to 90 above that say 120+ its gone or I could not feel it the car had warped brake discs but this was only felt when braking changed the discs same problem the tyres where in good nick 2.5 mm of tread but changed...

Yes thats right I was going to have a diagnostic test done to see what else shows up so it all can be sorted one step at a time will be quicker than hunting for other issues with the truck Was going to check the switch anyway when it gets a bit warmer [old git with thin blood] But at least now I...

Yes I know have tried with inhibit on which should allow all settings but still the same

My resent purchase has a few minor issues with eas It will operate fine on its own but you operate the switch will only select full hight or accsses any info on subject would be great cheers