will that remove the noching any thorts on the best place to get one from

hi every one i no the 110 axle was not ment to fit a 90 but was told thay can be made to fit as you can see my 90 has a 4.5" lift and 39" wheels dont no if thats adding to the steep angle that the props in. im using a front prop of a 90 in fully closed to fit but with the dif housing is all...

iv just spent the best part of 2 days referbing a sals back axle and fiting it on my 90 its off a 110 and all thow the dif housing is 2.5 " longer than the 90 iv put the propshaft on to find the angle is real tite is there any way round this problem or do i have to start all over agane many...

can i put a salbury back axle of a 110 onto my 90 and if so will i need to madify any thing to get it to fit i am wateing for a set of td5 axles but have been offerd the salsbury one in the meen time

can i put a set of td5 axles on a 200tdi with out swiching the transfer box or will i have to swich the transfer box as well

bling i think my landy has a bit of bling but pimp and landy just dont go together and dont let some on here get you down

thanks grunt will do mate will let you no how it gos

iv got a feeling its my fitting landrover chesterfield told me 7mm from the housing but id all ready fitted the back one flush i made a tool for fitting it at the 7 mm was a pain so im going to fit the next one flush if that dont work think ill follow you and look into geting some dif ones

i had 2 ujs fitted for £20

put in paddocks and it will bring it thay are about £14 but thay make the job so much better to do

£60 some ones had your pants down only a 20min job per uj £12for the uj so £24 and 40 mins

its cos the new microcat is out and the unipart numbers are not the same

you may find the td5 tanks have a prob with any thing othere than dev the fillter has a retern valve that gets blocket and will only run with more than 1/2 a tank dont no if the prob will still be there with bio or if you are running fat

get the propshaf tool it make life so much quicker

wilkos screw extractors work a treat

may be the seem has gone gos of over presher id still keep an eye on it may not be the cors mate

hi all think the 7 mm bit may have been a load of old bull as its leaking all ready after spending an hour making a tool to fitt it to 7 mm the back seal i did flush and it has no leaks at all

procomp do some grate ones iv got 37 12.5 r 17 and it was a pain to get them for the 17" but found them just takes longer and costs more lol

did you get the epc i sent mate

can any one let me no the best for a 90 that is 90%off road 10% on as iv had the blue ones and thay just did not last at all