All put new slave cylinder on and fully bled now got a pedal with about 1/2 - 3/4" play at the top then pressure but the clutch still won't disengage Can anyone help? Thanks in advance

Upon fitting a new slave cylinder what does holding the pedal down do?

Can anyone help, Following a clutch and clutch arm replacement now I cannot get a clutch pedal at all I've bleed it a few times now I am now very frustrated Help

After refitting my gearbox I was connecting up the electrical connectors and the one for the oil pressure switch the earth has come awey does any one know were the earth goes on the body? Thanks

Help I am trying to refit my 2003 53 disco manual gearbox, get it close but it gets fouled by the insulation around the bell housing, looking into the bell housing the shaft is about half a shaft away from the end of the clutch fingers Anyone got any...

Help Friend of mine's intermittent wiper doesn't work but the rest do on his 300 tdi 90 any suggestions of why? Thanks

Help Does anyone know how to extract the brass bush from the flywheel center (blind hole) on a manual TD5 disco 2 Thanks :confused:

Help Ive got a TD5 with the R380 box in it, Last night the slave cylinder push rod failed, I can now push the push rod in towards the gearbox Can this be fixed without taking the gearbox out? Thanks Andrew :confused::Cry:

Help Just fitted a genuine TD5 rev counter to a 2001 TD5 90 I've got the signal from pin 19 off the black plug on the ecu which runs in the loom up to the dash that's were I picked up the signal from I've created the loom for the dials and fitted the rev counter but it seems to be a slow...

All Just bought a 2001 3 door TD4 freelander with a couple of problems I could do with help with, 1st The central locking is a bit iffy the system will lock but it won't unlock the passenger door on the second press of the remote 2nd The rear door numberplate light/handle has come loose needs...

Ive got a 2003 53 disco 2 with a leaky sunroof, after some investigation ive found that the connections of the drain tube to the tray are leaking. Has anyone had this before and how of you sealed them again without the expensive option of buying a new sunroof tray Thanks

All I have not priced the parts but I would like to replace the ratio gears rather than change the full box as I may be getting another persons problems at least I know my box is ok Could do with the part numbers and prices Thanks

Looking to swap the gears!

Help I am going to change the ratio in my transfer box to 1.2 to get less road noise and reduce revs also save fuel? Has anyone got any tips? Thanks

All My parking sensors have stopped working? also the speaker is ommitting an high pitched noise also the led in the dash switch is flashing can anyone help Thanks :confused:

All My heated screen doesn't seem to be working I've checked the fuses and both ok any suggestions? Thanks Andrew Turner :confused:

I am refitting my alpine windows and sunroof back into my 90 after having the roof painted, Can anyone recommend a good sealer to use in conjunction with the rubber seals for the alpine windows and the fitted seal on the sunroof, so that I can stop them leaking. :confused: Thanks in advance...

Has anyone got a template to cut the roof on a 90 to fit alpine windows so that they align with the internal rear head lining Thanks Andrew :confused:

Help Going to retrofit alpine windows to my 90 has anyone got the dimensions to cut the roof to fit the windows to ensure they align with the rear headlining Thanks Andrew

All I was looking for honest answers, and by the way I also have a disco with a radio!