1. M

    Traction controll and Hill desecent amber lights on

    Go introduce yourself in the correct section before other grill you You need to find out what the codes are for the abs so you can repair the fault
  2. M

    brake lights and trailer

    I dnt have access to another trailer but my trailer is fine on a mates
  3. M

    rear half shaft oil seal

    Diff driveshaft seals are the same u also only need to undo 2 bolts and then you can get to them to replace
  4. M

    brake lights and trailer

    I just find it odd that it's only when the trailer is connected the brake lights dnt work unless engine running Clearly it isn't right but dnt no where to start looking to fix the fault
  5. M

    brake lights and trailer

    It's the earth on the plug no other as I bought a plug and play earth plus when engine off the rest of the lights work just not brake
  6. M

    Looking to buy a Freelander help and advice needed

    if you listed your location there might be members will to go with you for a view i would if u was local to me also introduce yaself in the correct section before you get grilled by others lol
  7. M

    brake lights and trailer

    just finished building my trailer and been and tested the lights all the lights work with the engine running but if engine not running the brake lights dnt work on either the trailer or the car disconnect trailer work on car again connect it then nothing any ideas
  8. M

    SRS light suddenly stays on no faults showing on reader

    Only a land rover equipped machine will read the airbags
  9. M

    OSR Window stuck Open HELP PLEASE!

    Jam it closed with a block of wood only take some idiot to mess with tape and could result in broken window Also using wood means from the out side it looks no different that a closed window
  10. M

    What have you done to your Freelander today

    Spent all day wiring my homemade trailer and treating the hippo to a new 7pin wiring loom this time one that plugs in and not bodged in using crappy connectors Once the idiot pining me in moves I might be able to test it lol
  11. M

    Freelander td4 2000 reg Three Amigo's ON

    Get a multimeter and test the resistance of each sensor look between 950-1100ish If u do find a sensor faulty replace the ring while your there as there only a few £ each then u no the corner has been replaced
  12. M

    Best Accessory

    Sorry to hijack a bit but hippo have u got v6 on ur hawkeye yet As for mods I have silicone hoses egr removal BMW cyclone thing lol There all good but the arm rest type console is my fav my l series came without one and I fitted one the td4 come with it if u dnt have one ud say that but I...
  13. M

    Scratches on front windows

    went to the scrappers last week and got a drivers window un marked :) now to make you mad i have no scratched on my current window but i saw this thread and then saw the glass in the scrappers and thought id have it its only a matter of time :)
  14. M

    Td4 exhaust

    Ur all stars thanks the previous owners clearly didn't fit it correctly
  15. M

    Td4 exhaust

    Hoping guys with a td4 can upload a pic of the middle section where it comes to the subframe Wanting to no how it looks as my exhaust is under aether the arms and looks stupidly low Can remember my l series going up and then under the driveshaft not the whole frame Hope that makes...
  16. M

    AC leak, DIY or not?

    O rings are not hard to change undo the bolt you see and the pipes would pull apart fixed a mondeo mk3 leak with new seal also I did use a tad of sealant when rebuilding had the car a few years never leaked
  17. M

    What have you done to your Freelander today

    found out i needed a new crank pulley today so have to start saving and get 2 new belts and 2 new tensioners while im at it
  18. M

    Disconnecting ABS

    If he listed a location members might be near who could help
  19. M

    What have you done to your Freelander today

    Built my hippo a driveway in the last week
  20. M

    tailgate trim

    cheers guys just didnt see the point in removing all the trims if i could just run a bead of something above it to deflect the water away :)