On my Disco 300TDi I get a rattling/chattering noise when in neutral and goes when the clutch is pressed in. Thought it was the release bearing but (I'm fairly sure) it's the springs on the friction plate which is no prob...

Thought I'd update. I've decided it's the springs. It's had a new clutch kit so odds are everything else is just fine and from what I can gather it sounds about right as it is a rattle, no squeal or grinding. So good news is I don't have to spend out or do any work :D Bad news is I...

Got a new one off ebay for a bargain and it works a treat now. Wish all jobs were this easy!

Ah ok, doesn't sound too bad. So I could transplant the lever from one to another then? If that's correct, do you know if one from a rear handle would work? The rear one's are cheaper. Thanks!

It's a Disco 300TDi and has central locking but I was wondering if it would originally have had a remote key fob as it didn't come with? It does have electric windows if that helps.

My Disco 300TDi drivers door handle has broken. The lever you pull to open the door was damaged when I bought it but continued pulling on it has snapped it leaving a small sliver that I now have to grip with pliers to actually open the door. Anyone know of an easy fix? I hear you have to...

Think that answers the question of whether the 200 lining delaminates... lol guess i'll be painting it then! thanks Tom

The cows udders that is my 300TDi headlining looks crappy so was thinking of getting the head liner from a 200TDi and putting it into mine as I read somewhere just the other day that the 200 liner doesnt delaminate and suffer the sag.. that correct?? EDIT: may well have read it on here.. and I...

So if I remove and refit, what am I looking out for or what do I need to do to stop the problem? Thanks for all the ideas guys.. loads to think about!

lol I dunno what to do now.. think I'll leave it till I really have to! I just checked and it had a new clutch kit about 6 months ago...surely that would include the release bearing? thinking hellbeck could be right..

Shall I just get a clutch kit and fit the lot then?

That sounds like what my mate said too. Has been doing it since I bought it a good few months ago. How hard a job is that? and is it expensive? I'm no amazing diy mechanic but can get by with a Haynes usually and I'll have a mate help out on it who is half tidy. Thanks guys :) EDIT: ok its...

It's a Disco 300TDi and When idling it chatters/rattles untill the clutch is dipped and it sounds fine. Had a couple of people say different things. One said prop shaft rubbers and another said something to do with the clutch. It had a new clutch plate in before I bought it but a mate...

Sorry! EDIT ^^

Rear wiper motor needs replacing but they are expensive even 2nd hand on ebay. The one I have has 2 sockets, one small 2 pin and a larger 2 pin. The older and indeed cheaper ones have wires attached to them. Compared to the one I have; 2 where the small socket is and 3 where the large socket...

I'm looking to put a new head unit in my discovery 300tdi and would like to be able to use the current controls around the steering wheel or fit new ones if possible. Anyone know how to do this if it's possible?

Update on how I'm getting on so far.. Rear windows fixed - soldered a dry joint on the window ecu. Front windows both working now - combination of wiring and ecu. Passenger door not locking via central locking - WD40 then 3in1 Rear wiper not working properly - nylon gear is stripped so need a...

Removed the motor and gave it a clean but nylon gear is stripped down the centre. Time for a new motor then!

The rear wiper on my Disco 300 tries to do something, you hear a noise but nothing actually happens... however.. if you give it a little help it goes through the motions. So the motor is working.. in some shape... just seems like it can't be bothered or is v tired. Any ideas what the issue...

Duh... Fuses!! 'B' Sattelite 2, Fuse 1.... ya know when ya get so into a problem but not really getting anywhere and you cant see the wood for the trees... Yeah really should have gone back to the fuses earlier! lol oh well, all working like a charm again! Just as well I got another...