thank you

I just phoned up and told them I needed a front caliper for a 03 Model. Will know for next time thank you

Fair Play I agree, I did not no the make of the one that had been fitted recently has no name etc, it was done whilst on holiday and not having tools etc to do it myself got a independent to do it. Will get new ones ordered today. Thank you

The other side has been replaced, recently but not by myself. They are not same brand does that make a difference? I did bleed all the calipers in sequence as per Manual. Thank you

Morning, appreciate some help please. I had to fit a new front brake caliper to drivers side the other week, after doing this when braking hard it pulls to the left but feels like there is more braking power to that side, firstly I thought the caliper was faulty so got another sent. But after...

Fitted new Fuel filter and Front brake clippers

Yep agree with weather, not sealing them permanently just going to reseal the frame to the body and replace rubber seal as well.

Leaking front and back no surprise. Drain tubes still ok and not blocked!! Going to remove old sealant and use Silkaflex.

Just finished removing head lining now waiting for new sunroof parts to arrive.

I took the ECU out and laid it on its side over night and let any oil out! lucky it was not to much also cleaned red plug. will check it again in a couple of days good point thank you didn't think of that. Just trying remove head lining now to repair sun roof leaks both front and rear.

Just fitted New Fuel injector Harness, as the old one was starting to weep into ECU

Thank you

Thank you think I get it, I was going to replace the fluid at the same time, once the hoses are replaced do I just keep the Master Cylinder topped up above low and keep pumping brakes until you see new fluid coming out of the bleed nipples in the right sequence ?

Ok thank you.

Hello, need to do the above, on my Disco TD5 once done I know I need to bleed to them but do I have to make sure the ABS unit is done as well? If the case do I then need a Hawkeye or other type? Much appreciated.

Hello, Only had my 1ST Disco for 8 wks and zero mechanical experience, pen pusher by trade:D. Yes awkward but did not want to touch the turbo bit nervous. I was draining out the oil anyway to replace oil pump bolt (which was loose) the normal oil filter plus housing gasket. Removed the...

Hello, removed mine to last week without removing Turbo to replace sealing ring that goes into the Oil Cooler as it was leaking oil.

Morning thx for the reply it is an Auto. sorry for lack of knowledge are you referring to the pipes on the oil cooler? The oil leaking looks like engine oil

Hello, after some advice again please for my Disco auto! The oil leak mentioned before that I thought was coming from Oil Cooler Banjos is not, there is very slight weeping but nothing major. Not leaking from Oil drain for the turbo, and not the oil filter or gasket. After running the motor from...

Update thanks for the good advice got there in the end :D. Using a combination of a good socket (Irwin), Heat oxy torch and in the end Grinder for the last two stubborn bolts. Now onto the next job!!