Does your stop solenoid work properly? is it still in? to test it disconnect the wire from the inj pump turn yr ignition on and touch the solenoid connection with the wire ..if you hear n feel it click then its working ok.I bought a 2.5 n/a with the same symptoms and after trying everything at...

Just had a look at the other thread on springs (leaning landy) ... its not my front drivers spr' thats longer its the rear drivers side.. a pair of rear 90 std springs have the same part number as a pair of front 110 hd n 130 springs nrc9448,nrc9449 and its the 9448 thats a fair bit longer. i...

Just had a look on this..were there only 127 90s made between 83-84?

New springs n shox came today from paddocks but the front drivers side spring is about 3" longer than the passenger side... is this the norm.? They are standard duty britpart.

I think ive seen it . it got a electric motor on the back wheel powered by a perkins diesel genny fitted under t' seat.

Had rod brakes taken off and had a 30lb anchor fitted and an old spoke jammed int' 3 spd hub and locked int' low ..

And seat is too close to streering wheel and they pull t' left when passing fields,and a whinch bumper on a bike , wtf.

Is it possible to gain any info like original spec or body type from my vin number on lr 90.

I got a pair o rear seats,gearstick gater,90 decals,a set o tyres,fog lamp, reverse lamp. had no money left for any wipers.oh and i got moderatley wet too.

Does the the disco transfer box go straight onto an early 90 gearbox?

Ive looked around for some new shockers but some are numbered wa159......and some are xa159.What do i need for a 1985 n/a d 90...

Put a wheel cover on t' spare or paint it,clean that old sticker off wi a bit o thinners on a rag and put a defender decal on above fog lamp and do summat wi exhaust cos it about a foot too low.....or just get it caked in****e then will look ok too.:rolleyes:

It was craddocks i found the 30 quider on but it took me a lot longer than that cheers.

I need to replace my windscreen seal, ive just looked at one site that want nearly £30 for one, can anyone get em cheaper..?

Roll damage all round. Contact Phil Mitchell, WALFORD..:D

Been at Driffield all weekend PROJECT 90 was there doing it stuff on some old cars nice machine but it owner refered to it as a TRUCK several times is this true?

Ive just come back from driffield landy show with a pair of exmoor foldaway seats,£90 the pair (second hand) of course.

It looks like it will have to be diy job cos i can't find anything anywhere but shouldn't be too hard i suppose i got a mig running on beer gas.. i might even wear my beer goggles too:D

My door bottoms have rotted off just waiting for this thread to open up. bloody dial up!

No ive got 2 of them but not much left to bolt em to.