1. klf400

    L322 TD6 gearbox service

    that seems expensive my local land rover dealer quoted , filter £24 , o ring 50p , gasket £11 which i bought at this price ,they wanted £23 p litre for the oil which i did not buy , if you are going to change and flush at this price there would be little change from £500, also the bits were not...
  2. klf400

    L322 Power steering and ECU fault ???

    i agree the noise is the little fan that draws air from inside the vehicle to measure the inside temp to see if it shuts down sit in the car switch everything of apply h/brake and select park then lock the doors with the fob and sit still or you may trigger the alarm then look at the park...
  3. klf400

    L322 TD6 gearbox service

    is this gearbox the same as in the x5 bmw ?
  4. klf400

    l322 engine hunting

    lee remove the top engine cover and look at the back of the engine their are 2 breather pipes that run from the inlet manifold and the cam cover to an oil seperator these can become perished flat and become rotten and holed therefore drawing in air which can cause uneven running this problem is...
  5. klf400

    l322 engine ecu extraztor fan

    cheers bemble i see were your coming from
  6. klf400

    l322 geabox oil

    tell me more is it easy ? oil expensive ?
  7. klf400

    l322 geabox oil

    anyone managed to change the autobox oil in a l322 , they a supposed to be sealed for life :(
  8. klf400

    l322 engine ecu extraztor fan

    working on a 4.4 v8 l322 vogue fitting brake pads etc when eveyrthing is switched of i can hear a noise coming from the engine compartment , 2 ecus in a box behind the air filter box , lifted the lid and there is a extractor fan running for quite a while is this normal ? anyone else heard this ? :)
  9. klf400

    blackbox solutions

    anyone having trouble getting onto blackbox solutions website ? ive been unable to log on for the past couple of days.is it just me or is anyone else having this problem. :)
  10. klf400

    Mpg on Lpg....... This the right way to work it out ? (Softsh*te)

    the most mpg i have ever achieved is 18 mpg and thats driving with an egg under the throttle ?????
  11. klf400

    Trouble sourcing a big bore for my 4.0......

    fit a janspeed cat back system about £400 if thats not loud enough remove the cats but only if you run on lpg :)
  12. klf400

    r/f reciever

    anyone got any pictures of the inside of the rf recievers and how to identify the older ones from the later ? i do recal rangiegal posting some on a good while ago but cant find them :)
  13. klf400

    What Does it Mean When Your Tyre is the Bump Stop?

    oversize tyres and wheels can also cause this [ l322 and range rover sport wheels ] i have 275/55/19 on my autobiography on access height you can get one finger in between tyre and arch :)
  14. klf400

    side steps

    yes it will
  15. klf400

    Fitting a fire extinguisher

    i keep 1 in each front door pocket so driver and passenger have access to them , otherwise you only fill em with rubbish . anyone thought of a battery isolator switch ?? :)
  16. klf400

    defender 90 rear drum to disc brake conversion

    this topic may have been allready covered but here goes i have a defender 90 v8 county 1989 with rear drum brakes is it much of a job to convert to disc brakes ?? what parts do i need apart from the discs and calipers ? i do have a 90 rear axle of a 2005 defender but not had time to look at the...
  17. klf400

    P38 heater blower

    yes you can - totally agree :)
  18. klf400

    Bang!!!!!

    i have a set like this made by dormer , trouble is if the stud/bolt is bottomed out in the hole you dont stand much chance getting em out if when drilling through you feel the drill break through into the hole you stand more stand more chance getting it out broken studs/bolts can be a bastard of...
  19. klf400

    rear crossmember

    fitted the hd mib crossmember on sunday , very good fit a little trimming and grinding seam welded all the way around , rewired rear loom soldered and heatshrink, etch primmed and top coated welds finished with a coat of black waxoil mixed with hydraulic oil inside and outside chassis .job...
  20. klf400

    Security item on eBay

    get yourself a doberman and allow your landy to be its kennel :)