Hi, i have just recieved my spotlights of rebel4x4 with all the wiring kit etc.. however there are no inline fuses or fuses built into the relay and realised i have no fuses (or can't see any) on my radio or cigar 4 way adaptor.... So for the following, what size fuses do i need??? a) 2 x...

Hi, how did you get into you compartment to feed the wires? Need to find a way to get wires to the back of my defender 90.. Cheers

I have decided to get all the proper cables etc and get help to install it, have removed all my old cables.. Now, whats the best /safest route to go to get to the battery compartment? Cheers, AL

I live in Wythall.. Cheers, Al

Hi, thanks for the link - so a direct connection to the battery is the best feed for the lights (via a relay & fuse?) Cheers, Al

Thanks, im just really keen on doing up this vehicle and learning on how to do it!!! Think i need to make some contacts with folks in my area who can show me a thing or two!! :) Cheers, Al

Hi Big Red!!! I love this defender!!! I managed to route the hose for the snorkle, behind the heater and up to the air intake - got it all siliconned and rivited on!!! What can you tell me about this vehicle, any pics of it in action etc...!!! I have orderd an a-bar and some spots so will get...

OK - will take it in somewhere to get this done properly - if i cant even do this myself, whats the point of buying an old landrover to do up?

Hi, where can i pick up a permanent live from in the fuse box for the feed to my relay?

See you what you mean, thanks for the advise. Do i pick up an earth near to the lights or take a new earth along with the live? Cheers..

Whats the different between using the cable off of my pressure washer (3 core with 13 amp plug) and buying a roll of cable to do the job?

OK, get the message - where do i get the cable? Halfords??? Cheers!

Was going to use some 3core 240v mains cable off my pressure washer, looks pretty thick - will this be ok?? Do i just feed the 12v from the relay down the wire and pick up an earth abit nearer to the lights off the chassis???? Thought about sticking the switch to the right of the stering wheel...

Hi, whats the best way to connect up a pair of work lights on the back of my 1985 defender? I have already fitted the lights to the vehicle but not sure where to feed the wires to, where to fit the relay & switch.. I thought about running the cable acroos the top of the windows (inside) in the...

Nar, they are just the standard ones. I presumes i can get to the contacts on the stalk to look at it. I have just ordered a headlight conversion kit, A Bar & spots with relays, etc... So will sort them out the weekend!! Many thanks. Al

Hi, i have fixed the problem by swapping over the connectors for each light. Think i need a new stalk as i cant flash the beam by pulling the stalk forwards - cant hear no contact. Could this just be a dirty contact on the stalk???? Cheers, Al

Hi, when i puch the stalk forwards the lights are dipped, when i return the stalk to the centre the beam comes on. When i pull the stalk forward to the momentry position nothing happens. I dont get any indication on the dash also..... Cheers..

Thanks for replying, i think they are back to front at the moment and the quick flash doesnt work anyway, can i just swap the bullet connectors over to fix the problem??? Many thanks, Al

Cool!!! I have all the bits so i will have a go on friday!!!! Thanks for your advise.. How do i set up my signature and photo on my posts? So i dont look stupid what do i state my defender as? 1985 Defender 90 2.5NA? Cheers! Al

Hi all, i dont have many lights that work on the dash... is this just a bulb that needs replacing??? Also should the beam be on when you push the stalk back or is it when you pull the stalk forward? Not sure if the wiring is back to front!