Put tank in same place. Use the D2 so keeps it all standard.
Fuel cap.look at the race car/marine type these are small(make sure a diesel nozzle will fit) & this would mount under the tray back
There has been a tray back build on here
(Off for...
Don't worry about over thinking things. It is normal when you have a project. I reworked and made about 4versions of the spare wheel mount for a kit car and I am still not happy with it.
It’s plug and play mate, to bleed it you can just undo the banjo’s to modulator and pump the brake pedal to get fluid out then tighten them up and bleed the rest of the brakes as normal then job done.
Or if you got a nanocom then use that for it...
You are seriously over complicating things. No need for your set-up to be more complicated than the original.
I speak as someone who has had to fabricate fuel tanks for kit cars.
Why can you not use a D2 or a D1 tank? If you want a swirl pot is...
We keep the fan in the bedroom going for them more than us as well as a dog bowl of water on the landing.
Edit: I felt that I should add that we don't lap from the same bowl as them, no matter how it is!!
Its melting outside we have peeps coming at 5 for drinks then I'll get the bbq fired up. I think its too hot to sit out
got a big fan going in the living living room to keep the dogs cool, they have a pool outside as well. :)
In this weather we,like many round here always have a biggish bottle of tap water in the fridge. It helps that our tap water tastes good. No need to freeze it unless you intend going on a trip or summat.
Gorra 1.5L plastic bottle ov water int freezer to make me drinks. Never leave it in long enuff to freeze. Just go cold and form a bit ov ice round the inside. When cold it goes int fridge.
Tis quiet outside. Good to see peeps taking up the...
When there are thunderstorm s they can blow the Sosh box and even blow our phones, this has happened in the past. So we disconnect it. But we can still use mobiles,so we do. Dottir tells me she is off the plane and OK. I suspect she has...
Today I took W to the airport for her first trip to Blighty. Got there in plenty of time. Got back 45 mins later so at about 13:30.
She was still in the airport at 1600hrs.
Flipping Ryan hair.
She said apparently the plane never fully left...
I would also add that the switch makes the connection (would agree bimetalic switch) to P & N but the load, your floor element maybe off terminals 5&6.
Who knows what goes on behind?
J
I have fixed 2 minor faults on the Mini today. :)
L-Turn tell-tale on the dash was not working. Took the whole cluster out and checked the bulb which was OK.
I cleaned the copper track and tweaked the bulb-holder spring contacts and it all...
Just hadda cool baff to cool down. Left the baff room door closed because the sun is about to hit the window. Nice and cool in the hall. Upstairs ok but downstairs is coolerer.
On the Discovery thread part of the forum there are various work-arounds that peeps have done to keep the torque convertor in lock-up. I have been tempted because it comes in at just about the legal max on A roads and, as you said, drops out for...