1. J

    P38a leaking 4th injector

    Will keep my eye out for a reasonably priced one I stripped the inlet off for a lot easier access. The socket is way too fat so fouls on the cylinder head. I have a draper one but doesn't have the cut out and the walls are a lot thinner. I just kept grinding until they matched. The only...
  2. J

    P38a leaking 4th injector

    Just a quick follow up. Worked a treat. The way I found to test it was creating a vacuum using the two return pipes. Put a finger over one end and suck through the other. If you can't create a vacuum you've got a leak. Remember to coat everything including where the wires come out Oh. And the...
  3. J

    P38a leaking 4th injector

    I have some vht araldite type stuff. Will give it a go then do some overtime if it doesn't work!!
  4. J

    P38a leaking 4th injector

    Can I stick a normal injector in. I understand the ecu will stick a warning light up but will take a value from memory. At least I will be running again without a leak!
  5. J

    P38a leaking 4th injector

    1997 dse auto My 4th injector is leaking from behind the black plastic housing on the top. I have replaced all the leak off pipes as number 1 and 6 were leaking too I have just spoken to a bosch specialist who tells me the 4th injector is not a serviceable part so will have to be replaced but...
  6. J

    P38 window switch pack

    My window switch pack has finally given up. My question is mine is a non sunroof model. Will a pack with a sunroof switch still work? Jon
  7. J

    2.5 injectors and egr

    Well. Have just removed number one injector. Was very oily. Think I may have a leak from the filler cap as there was a little trail from it. Have cleaned up the thread and bore and put it back in. Am away now for a couple of days and my new manifold gaskets should arrive soon too. There was a...
  8. J

    2.5 injectors and egr

    Did check thereturn pipes and couldn't see a leak. Was hoping it was going to be that simple. The bubbles make me think it's coming from the bottom. Will change the pipes anyway
  9. J

    2.5 injectors and egr

    My number one injector has developed a nasty leak. The entire well is full of diesel and there are air bubbles coming from the base so I'm guessing it needs the m24 copper washer replacing. Is it worth changing the o ring at the same time? If so I haven't got a clue how to strip the injector...