Thank you for the reply. I assume you think it could be the final part of the latch mechanism sticking? Do you know if this is common and something that does free up? I had spotted something when trying to learn more, about owners cutting doors apart due to no other options! I really hope this...

Hi all, My D1 has sat up for a bit and i'm in the process of getting it back out there. As the title..... my rear tailgate won't open! I have read plenty of info'/forum posts etc' over the last few days and my issues doesn't seem common, as there is no way I can get the latch to release...

Thank you very much for the reply.

Bump - No one have any experience of this? From online pics, the pads look identical, just a different part number. Cheers

I can say that I definitely felt the difference between gearshift when i drained atf from my r380 and filled with mtf. This may not be the case for the lt77. Anything that helps the feel of such an agricultural gearbox is worth the extra £15-20 on oil in my opinion. All the best

While i remember, look into getting your clutch fork strengthened, or buy a HD one. That must be a pain to have to change if you were none the wiser and the rod pushes through it not long after doing a clutch. The fork is only a few quid along with a fitting kit for it.

Remember it is worth doing the rear crank seal (behind flywheel) and g/box front seal if doing the clutch and have no history of them, the last thing you need a month after is to see a leak and have to do the whole job again for a tenners worth of bits. The correct oil for the R380 gearbox can...

Hi all, Will front brake pads with part no: STC9190 (i believe for the vented front set up) fit the standard solid disc set up I have on my 300 disco? I have the solid pin with spring type front calipers, the only difference I can read about the set ups is the spacer between the caliper...

Thank you for the lesson ;)

Really? The pinion shaft that the nut tightens on to has a taper bearing on the rear of it. As far as I am aware after removing a few, the torque is important. Too tight and the bearing will wear out, too loose and the bearing will wear out, plus wear out the teeth on the pinion gear and...

Bump

Hi, as the title says - will an earlier 2 pipe non abs 200tdi brake master cylinder work in a 300tdi that has the 2 pipe master cylinder and no abs? I know the servos are the same. Apart from the part numbers being different, they physically look the same. The systems are very...

Thank you for the reply. I had look at the models you suggested, the casing looks the same, but the motor is different. Any ideas on what would cause the freespool issue it has? Cheers

Hi all, I need help working what model Warn winch is fitted to the front of my disco 1. I figured my best bet would be to ask on here after Warn themselves have not seemed to be all too helpful. Today I got the white spirit and a scraper out to try and clean off some rattle can paint from...

Bump. Can anyone answer this for me?