Everything mentioned above plus any thing we may have forgotten

I can't do that without a lot of faff. I run bio which eats rubber and I've converted everything to clear nylon pipe and compression fittings and a facet 12v pump. My plan is to fit a 8 or 10mm 90deg compression fitting to the sender and lengthen...

I can’t remember the size off the top of my head, but I deleted that pipe and now have one length of diesel hose from the sender to the lift pump.

Ahh yes. Forgot to add the compressor, gloves and overalls to my list. Also an led torch that's permently plugged in in the aux plug in the boot and the necessary lead to charge a phone.

Diagnostics, Schrader valves and a 12 volt compressor plus gloves and an overall.

I've just got recovery service, shrader valves, some leak off tubing and the nano. I carry nothing in the 110.

I've got a leak from the last metal pipe just as it enters the sender, it broke off easy when I touched it. The nut and olive arrangement is rubbish as is the metal pipe with the bend that goes to plastic upstream. I've ordered a new sender...

Thanks for your help guys, much appreciated. I have ordered a set of these ---- https://www.ebay.co.uk/itm/142037625100 ---- and a pair of gloves to keep the bits of my fingers in until I get to A&E

Rubbish type on the left Excellent type on the right.

2 per spring is OK. I've purchased 2 sets over the years, first set were not so good, kept slipping. Second set were much better. I'll get a pic...bear with.

Just checked, haven't got it anymore, I remember it caused issues with storage or memory or something on my phone as that's all I have. I'm pretty sure I downloaded it off one of the p38 Facebook groups so have a look under their files.

I did. Can't remember if I had an issue or not though. I don't think I've got it anymore (but I'll check) as I got the paper version last year.

Maybe it was the same guy that did the sunroofs 👍

I have just had another look at the pics I posted. If I see it right it looks like the big belt could be changed without the little 1 being changed. Why you would struggle more and only change 1 while you are in that far I dont know. but in a...

I had mine blasted and hot zinc sprayed maybe 20 yrs ago along with lots of other bits and bobs. I then painted them. No rust but the paint is a bit iffy now. My local galv place had a minimum order value of £100 a while back, maybe that's an...