dominicbeesley

Well-Known Member

• Jul 18, 2014

• #1

I bought these wheels a while back for Spares. They are the right diameter, offset and width but the stud radius is too small. The only other difference is that each has three extra rivets that look like they take a hub cap. Has anybody got any ideas what they might be off.

Picture shows one resting on a series 3 hub

 

Attachments

• 
  DSC_0291.jpg

  132.8 KB · Views: 205

samc88

Drivels spiritual representative

• Jul 18, 2014

• #2

Mine has rivets there for the old dodgy hubcaps that were on it

I still have them somewhere

 

Dr_evil

Banned

• Jul 18, 2014

• #3

Brockhouse trailer possibly

 

dominicbeesley

Well-Known Member

• Jul 19, 2014

• #4

Looks like they will be going to be weighed in then...bit of a bugger, I'd just paid to have one blasted too.

 

Dr_evil

Banned

• Jul 19, 2014

• #5

If they're for a brockhouse I wouldn't weigh them in!

Worth a bit now are them trailers and accessories

 

dominicbeesley

Well-Known Member

• Jul 19, 2014

• #6

Looking at some pictures on the net I suspect they might be off an Austin Gypsy....

 

samc88

Drivels spiritual representative

• Jul 19, 2014

• #7

Could be the photo but they dont look as deep as a series wheel, if you look at mine above, you can see they appear to be much deeper

 

CarlosVanDango

Active Member

• Jul 19, 2014

• #8

ive got a set of standard wheels if they are what you need??

 

dominicbeesley

Well-Known Member

• Jul 19, 2014

• #9

Hi Sam, they are as deep the only difference is the circumference of the whole and of the stud pattern, offset, depth, width are all the same.

Thanks for the offer Carlos. I think I'm alright for wheels for now I just picked that one up off the pile for blasting, I've got some others but they have random old tyres on and I couldn't be arsed taking them off...