E

EntropyUK

Well-Known Member
Now that I have the fuel pump done and the next couple of jobs planned, I need to look at the other obvious issue. Currently both rear tyres are worn on the inside, I am not sure if the previous owner rotated the tyres for some reason so need pointers on what to check to see if it is an issue with the back end.
 
Guessing he rotated the tyres. Only thing back there is the rear panhard?
 
How would I swap the bushes using OEM replacements and no special tool or would you recommend poly bushes?
 
I've wondered the same thing. Apparently you need a big press. On little cars Ed China (Wheeler Dealers fame) has wound bushes in and out using a long bolt with washers and a socket. Not sure if that would work?
 
You must log in or register to reply here.

Similar threads

ijmj
Spacers to stop tyres rubbing?
2
Replies
22
Views
2K
ijmj
ijmj
N
Freelander 1 Rapid tyre and brake wear
Replies
16
Views
1K
GrumpyGel
GrumpyGel
N
Freelander 1 I have a freelander currently on a Caribbean island with a bad rear diff . can i delete the rwd --looking to convert my freelander to 2wd front wheel
Replies
6
Views
779
Philgt50
Philgt50
M
L322 L322 stuck in extended height
Replies
2
Views
458
Blob
Blob
julianf
101 tyres and wheel banding.
Replies
10
Views
2K
Wildefalcon
W