Hi Guys.
Well i've finally got the engine in and now i'm trying to sort all the electrics that the previous owner hashed up. Literally.. nothing worked before i started on engine and still now after its in. I have however sorted some, Just need a little guidance on a few things if anyone can help.
This is a discovery 300tdi conversion into defender 90 G reg.
I have taken a few photo's of things that are baffling me.
1st up:
Does anyone know what this wire that comes out from behind passenger headlight near oil intercooler is for!! Just sat there but nothing nearby to hook up to so no idea what it was there for.
2nd up:
One of the main problems i'm having now is that there is absolutely no power through heater fan and this is something i have never encountered before so am not sure where to start looking.
I will take the dash apart tomorrow to see if there is any issue behind but before i do that... i have noticed there are 2 wires above the heater module that look like they should be connected to something:
You can see the in the middle of pic
Can anyone tell me what they are and should be connected to!!
3rd up:
This is pretty obviously broken and i'm guessing that it is some kind of pump or sensor for water level and as there are 2 of them, 1 must be for front and one for rear.. but which is which and what is its proper name so i can source a new one?
Next question, although no pic as forgot
There is a double pin (plug type) sensor in the top middle of engine in section next to rocker cover. Any idea what that does?
Tomorrows task is to try and get interior lights working and heater system.
This thing really was butchered by previous owner and apart from the engine having blown up instantly, there are plenty more problems inside.
I expect there will be a few more HELP THREADS to come.
Thanks guys.
