taylorslandy72

Active Member

• Jan 8, 2014

• #1

Hi everyone, had the light Wireing almost replced recently, the only thing I'm stuck on is the main beam wires, can some one tell me where the wire goes to on the stalk and where to on the light wires themselves, hope this is clear to understand. Thanks

 

oxides

Well-Known Member

• Jan 8, 2014

• #2

S3? It'll be a blue with white trace wire - should be one of the wires on the 3 way multi plug connector that goes into the main loom.

 

taylorslandy72

Active Member

• Jan 11, 2014

• #3

oxides said:

S3? It'll be a blue with white trace wire - should be one of the wires on the 3 way multi plug connector that goes into the main loom.

Click to expand...

Where does it connect to (cable colour etc)on the light end. Thanks

 

oxides

Well-Known Member

• Jan 11, 2014

• #4

It's blue and white wires all the way - there's a 2 way bullet connector somewhere on the way to the offside front wing which splits the feed left and right then it goes to the headlamp assemblies. Not sure which connector is which on the back of the sealed beam lamp but it should be colour coded all the way.

 

oxides

Well-Known Member

• Jan 11, 2014

• #5

Ah, found this
Headlamp Fittings and Wiring