fair enough, i just thought that if i wired an earth it'd save me having to scrape paint off things and rust proof them after, and if it were to be wired in one colour i'd tag the cables :D

I just used a band of red heatshrink on the live feed etc at the relay end, call me daft but i didn't want a multicoloured light bar! Is that a bit chavvy/gay??? :eek:
 
i thought that :) that was the reason behind multi core cable :p or there might be a way of feeding the cable through the inside of the light bar?
 
Last edited:
i thought that :) that was the reason behing multi core cable :p or there might be a way of feeding the cable through the inside of the light bar?

Mine came predrilled for internal wiring, but when I built my mates up I drilled it first (think i settled on 12mm) drill on bottom of bar so it doesn't become a water container!
 
my solderin isn't too bad :) it's even neater when i remember to put the heat shrink on before i do it lol, whats the best way to pull the cable through?
 
with the 12mm holes (think they're bigger on my predrilled one) you can just push the cable through and fish the end out as it passes the hole, repeat x 4 and away you go!
Might be more tricky if you use 2x1.5mm though, might need to use something thicker as a guide...
 
great, well i'll have a go tomorrow :) do we think amp cable will be enough? i've just found some laying around (sorry not to good with ratings)
 
great, well i'll have a go tomorrow :) do we think amp cable will be enough? i've just found some laying around (sorry not to good with ratings)

How many amp cable???

photies...

DSC00429.jpg


DSC00430.jpg


DSC00431.jpg


DSC00433.jpg
 

Attachments

  • DSC00431.jpg
    DSC00431.jpg
    119.6 KB · Views: 850
  • DSC00433.jpg
    DSC00433.jpg
    123.1 KB · Views: 761

Similar threads