OK looks like I was wrong, maybe as it was already in and wired I didnt pay much attention, anyway the cables actually come out the front

6C5F46E0-4D15-4FAA-AB0E-424AA208E35D-556-0000002AEA84874F.jpg

as you can see the antenna coax goes up to the antenna above under back quater light window I have my fingers on the antenna wire.
AD6680A4-87A6-4B1E-85C8-1CB61CD51BF1-556-0000002AF088023B.jpg


As you can see from this picture your looking for 3 individual cables, a brown, a red with yellow trace and a white with green trace.
5CE9471B-A265-4B60-B1E9-E74AF543DAF3-556-0000002AF858D7CD.jpg

These cables all go back to the main loom which I have pictured here, maybe double check its not wrapped up tight in there somewhere as it does honestly look like mine was dragged out as an afterthought, its not tightly wrapped up in loom tape like the other stuff it looks like it was pulled out seperately at a later date.
526B97D2-4CEE-484F-9EBE-4B10D1EFC033-556-0000002AFFF8C1E3.jpg


Hope that is of some help. If you need anything else I will have more time tonight after 9

Paul
 
Hi Paul,

That's of great help !
Thanks !!

Well been out to mine and I definitely haven't got that shape of plug!

Although the one I have pictured is in the sane area as the receiver location and the plug has 3 cables of exactly the same as your 3 cables pictured going to your receiver.

This must be the correct cables
I reckon the early L322's had the older receiver that maybe used a different type of plug ?

Need someone with a 2002 to confirm now lol
 
Last edited:
I have definately read during my long research into this someone retro fitting a t90 to a pre facelift L322. There cant me much as far as I can tell it looks to me like 3 cables would be 12V/Ground/Canbus signal (switch wire) and the only other thing is the antenna which im guessing will be the same. Worth noting also hippo I did read a few times that people who had them done at the stealers at a later date said that the install consisted of being suplpied with a remote, the reciever (t90) and also an updated window antenna to give the reported upto 600M range. So dont know wether that antenna would be a pre requisite or not.
 
Aquiesce said:
I have definately read during my long research into this someone retro fitting a t90 to a pre facelift L322. There cant me much as far as I can tell it looks to me like 3 cables would be 12V/Ground/Canbus signal (switch wire) and the only other thing is the antenna which im guessing will be the same. Worth noting also hippo I did read a few times that people who had them done at the stealers at a later date said that the install consisted of being suplpied with a remote, the reciever (t90) and also an updated window antenna to give the reported upto 600M range. So dont know wether that antenna would be a pre requisite or not.
Click to expand...


yes im sure i can get it working.

i think webasto do a converter harness to convert the older type plugs to the new type.

i just need to either get hold of this adapter harness or just get a plug off a scrap L322 and solder them myself.

i will also need to buy a window mounted antenna as i dont have the TV tuner module fitted which the receiver uses for its signal.

just bought a fob aswell. the T91.

a steal at £25 :D
 
Why don't you just wear a big coat??:cool::D:p

I remember one winter in my old 3.9 Classic - the heater fan didn't work so I drove to work wearing goves, scraf, hat, jacket, ear muffs! and a hot water bottle....

I loved that Rangie....till some barstewards nick it!
 
Saint.V8 said:
Why don't you just wear a big coat??:cool::D:p

I remember one winter in my old 3.9 Classic - the heater fan didn't work so I drove to work wearing goves, scraf, hat, jacket, ear muffs! and a hot water bottle....

I loved that Rangie....till some barstewards nick it!
Click to expand...


haha thats why i bought a range rover !!! i dont want to drive in the cold !

its bad enough my heated steering wheel isnt working at the moment!!!! lol

iv been through the ****, my old w reg freelander was awfull at defrosting, took 20 mins to get luke warm air through the vents ! lol

now the range has heated eveything and the FBH. (that i want to activate from inside the house - to save getting cold ! haha) :D:D
 
2.0_hippo said:
haha thats why i bought a range rover !!! i dont want to drive in the cold !

its bad enough my heated steering wheel isnt working at the moment!!!! lol

iv been through the ****, my old w reg freelander was awfull at defrosting, took 20 mins to get luke warm air through the vents ! lol

now the range has heated eveything and the FBH. (that i want to activate from inside the house - to save getting cold ! haha) :D:D
Click to expand...
My Steering wheel heater doesn't work either - the light comes on and then immediatly off again!!
 
Saint.V8 said:
My Steering wheel heater doesn't work either - the light comes on and then immediately off again!!
Click to expand...


exactly the same symptoms as mine !!!

mine did work last year, usually that's the sign of the heating element failure within the steering wheel.

i just cant face the cost of a new steering wheel yet, a shame though as it was quite good for keeping your hands toasty on the colder days lol

i cant do wearing "driving gloves" LMAO :D:D:D
 
I have never needed a steering wheel heater before I am sure I can live without it...
 
Ahh see I have a working heated steering wheel, and all the heated seats work...........................appart from the drivers heated seat :(
 
Yeah I love my heated steering wheel and its not even proper cold yet, I still use it :)

As for te t60 unit your looking for According to Microcat it wasinstalled up to VIN # 2A999999
 
2.0_hippo said:
There where s few petrols that had them fitted
But very rare to find one lol
Click to expand...
hippo mines got the feature on the nav screen but never tried it,i cant check it sadly cause its in for gearbox repair again:(will have a look for you when its back
 
On the petrol models, the timer settings are for Auxillary ventilation only - it starts the blower fans to cool the interior....
 
Aquiesce said:
Yeah I love my heated steering wheel and its not even proper cold yet, I still use it :)

As for te t60 unit your looking for According to Microcat it wasinstalled up to VIN # 2A999999
Click to expand...


Thanks for your help.

much appreciated.

Well im confident i can get the newer T90 receiver to work, just wondering now is the output to the FBH a canbus connection or an analogue +12V switched ? ? as i have heard you can manually test the FBH by applying 12v to the fbh switch line. which suggests it uses an analogue switched +V to activate the FBH.

Ill just connect mine up with the same connections as yours and see what happens.

:D
 
You must log in or register to reply here.

Similar threads

Bumpydog
FBH 2013 Disco 4 remote
Replies
0
Views
359
Bumpydog
Bumpydog
B
Brain meltdown over audio issues.
Replies
3
Views
681
gold rover
gold rover
Flossie
P38A Central locking query
Replies
13
Views
1K
Datatek
Datatek
Blob
L322 FBH circuit board test/repair any recommendations?
2
Replies
33
Views
6K
Datatek
Datatek
Chema Disco v8
Disco 2 Disco 2 V8 All doors but drivers locked but immobilizer working and car starting.
2 3
Replies
51
Views
3K
Chema Disco v8
Chema Disco v8