i recently bought a few parts off ebay (rear door trim, interior clock and rear door windscreen wiper motor/arm) for my 300 tdi disco from a broker on the other side of the country, problem is that when they arrived, the clock is different, the trim is a slightly different shade of blue and the wiper motor has a different electrical connection:dohi presume they are from a 200tdi?). i really cant be arsed packaging it all back up to send off at my cost for a refund because it was quite cheap anyway so i'll **** the trim and clock off but is there anyway i can bodge the wiper motor to work with crimped connectors or sumat? havnt got it to hand but i think the wires were different colours on the motor and the car connection.

john

expose wire, twist wire, stick wire into rear door harness

200 and 300TDi wiper motors use the same plug - or at least the 300TDi rear door i got fitted the 200TDi door loom

:nopics:

it`s the newer motor... gotta a different molex on it... plus the rear door harness is different slightly... look it up if you got microcat... easy bodge though... meter out the loom and stick the corresponding wire into the plug...

easy enough to remove the pins and refit into the old plug.

thanks lads, i'll have a butchers tomorrow. will post back if any problems

john