StuRox · Feb 25, 2011

Well, just starting to do all the checks ready for the MOT next month......

Will this on the rear door sills make a fail??

Rear Passenger Door....

Rear Drivers Door....

I know it will need to be seen to, but was hoping to get them all sorted out in the summer....

Cheers

jamesmartin · Feb 25, 2011

depends on your mot station

StuRox · Feb 25, 2011

mmm, thats what I thought, as its within the 12" limit (or whatever measurement....) of a seat belt anchor, but it has nothing to actually do with the seat belt so wasn't sure....suppose same as the boot floor that I had repalced last year prior to MOT.....

alexdon · Feb 25, 2011

It depends on how severe the rust is. The driver's side would appear to be the worse of the two. It is within 30cms of the seat belt mount. The Mot tester can't (shouldn't) poke it through. But, as above, it will pass at some stations and fail at others.

StuRox · Feb 25, 2011

so, next question, anyone use a 'good' MOT garage in the somerset area?

Just moved down to the West Country from the North East, so no longer have any garages that I 'use and know' without travelling a 600+ odd mile round trip

alexdon · Feb 25, 2011

Here's mine which did fail the MOT.

oldskool · Feb 25, 2011

alexdon said:
It depends on how severe the rust is. The driver's side would appear to be the worse of the two. It is within 30cms of the seat belt mount. The Mot tester can't (shouldn't) poke it through. But, as above, it will pass at some stations and fail at others.

He can use his likkle ammer

and thumb preasure, and i would say that is probably a fail but it's realy upto the tester doing it as its hard to tell from a picture.

paul_c · Feb 25, 2011

Driver's side is a fail, passenger side is a pass.

Swampey · Feb 25, 2011

Stu

Just slap some rust protection and some hammerite on it and see what happens.. you'll be sound

123tom123 · Feb 25, 2011

oo mine are pretty bad nearly as bad as alexdon's and the mot is on monday. ah well fingers crossed

leg oot the bed · Feb 25, 2011

the cracked one will fail the other should be an advise as its within th prescibed area of seat belt anchorage dependant on tester though really !

StuRox · Feb 25, 2011

123tom123 said:
oo mine are pretty bad nearly as bad as alexdon's and the mot is on monday. ah well fingers crossed

Fingers crossed, let me know how you get on, and if it passes - let me know the mot station for mine

I am going to have a proper look at the weekend with screwdriver, and prod around to see how bad it really is....and then no doubt start to regret it, and have to get it welded etc.....

123tom123 · Feb 25, 2011

yer you dont want to start poking around you just find more problems

njh2 · Feb 25, 2011

..when you say the west country, where abouts...?

Nick.

tottot · Feb 25, 2011

Also look under wheel arch where pillar comes down,rust hole here MOT fail.

mad mechanic · Feb 25, 2011

1 pass with advisory,other one fail but i would be looking to why the wing is coming away, the sealer is split mate on one side. unless its battle damage lol

StuRox · Feb 25, 2011

tottot said:
Also look under wheel arch where pillar comes down,rust hole here MOT fail.

Had a look around in the wheel arch, can't see any holes, but dont want to take off all the mud and crud, as thats what is probably holding everything together under there

tottot · Feb 26, 2011

I dont know about others but my MOT man if presented with a clean car he goes around tapping with a toffy hammer, present a crud coverd one and out comes a great big screw driver that gets jabed in hard.

V8jon · Feb 26, 2011

The tester will probably not be bothered about them,after he's put his fist through your inner sills lol

StuRox · Feb 26, 2011

tottot said:
I dont know about others but my MOT man if presented with a clean car he goes around tapping with a toffy hammer, present a crud coverd one and out comes a great big screw driver that gets jabed in hard.

Makes me laugh as I got at an advisory last year as I had a child seat in the rear, and they could not test the seat belt, as they 'could not touch' anything and therefore remove the seat to test the belt!!!

Yet they can quite happy bash with a hammer.......MOT testers :doh:

Well-Known Member

Well-Known Member

Well-Known Member

Active Member

Well-Known Member

Active Member

Attachments

Well-Known Member

New Member

New Member

Active Member

Active Member

Well-Known Member

Active Member

Active Member

Well-Known Member

Active Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Similar threads