S

sarstad

Active Member
hey

i hav just bought mu first range rover p38 DSE

but the gay i bought it from have fore som reason taken out the EAS ECU :mad:

nov i have looket on ebay after on but i can see that there is a difference in the nummbers .....

now my ? is which EAS ECU do i nee for my 96 p38??
 
sarstad said:
it have alle the ait system buy only the EAS ECU is missing :(
Click to expand...
So how do you keep the suspension inflated?

I reckon you will have to source an EAS ECU from the same year as yours to be safe. Others like Irish rover may know better.
 
Datatek said:
So how do you keep the suspension inflated?

I reckon you will have to source an EAS ECU from the same year as yours to be safe. Others like Irish rover may know better.
Click to expand...


:) thet is dte problem the car is on the bump stops :eek:

can see thet you jan a 96 2,5dse
is it possible that you and give me then number on yours EAS ECU??
 
And you bought it on the bump stops?:eek:
I think they're all the same but as Datatek says, others such as Irishrover may know better. Ebay is your best bet for a replacement. I got one from there for around £30 and it's fine. There's not a lot goes wrong with them, it's usually other parts of the suspension that give the problems. Are you sure all the other parts are there - compressor / valve block assembly etc?
(I only changed mine as the faultmate wouldn't read it for some reason although a Rovacom did).
 
RQT100040 should be the part number you need for the ECU. this number preceed ANR4499 that had a factory recall due to a fault within the ECU or something like that
 
All of the P38 EAS ecu's have the same functionality - so thats any of them with with two screw holes holding them down to the floor of the car.I say this because the earlier Classic ecu's have fixing screws in the same plane as the plug on the end.Hope that makes sense.;)
 
You must log in or register to reply here.

Similar threads

JamesBB
P38A EAS again.
2 3
Replies
41
Views
2K
JamesBB
JamesBB
O
03 L322 EAS ECU Can bus fault / ABS temp system deactivation
Replies
1
Views
1K
oldradiotech
O
Dieselmec 42
Td6 EAS ECU input voltage
Replies
0
Views
419
Dieselmec 42
Dieselmec 42
feyniriel
P38 EAS problems
Replies
18
Views
2K
pwood999
pwood999
U
L322 (2003) No Start - CAN Bus/Engine ECU Communication Issue
2
Replies
21
Views
2K
Grrrrrr
Grrrrrr