discoboy84 said:
i'd start checking around the rest of the disco for the last owners 'MODIFING' ;)

i'd just go on the bay of flea and search universal air filter, the G boy type

and remove the top of ya snorkle and bolt it up there ;)
Click to expand...

whatever last owner has done LOOKS to be right:), it might only when i delve into it further i find out for sure :eek:
 
BhQPrwmkKGrHgoH-CgEjlLl1Ej9BKctCsL1.jpg

Something like this? won't go high up but i could piece it in under the bonnet and it looks like it will keep the water out?????????
 
try gresti's scrapyard on langworthy road south m8, they will have something there ya can use, chances are they will have a disco filterbox knocking about somewhere
 
gegs88 said:
try gresti's scrapyard on langworthy road south m8, they will have something there ya can use, chances are they will have a disco filterbox knocking about somewhere
Click to expand...

I used to live off langworthy lurverly place!!
 
That'd do it, but I'd (me being a bit of a perfectionist) would take it apart and slap a shed-load of silicone or a n other sealer about so it's definitely water/air tight.
 
Paul D said:
That'd do it, but I'd (me being a bit of a perfectionist) would take it apart and slap a shed-load of silicone or a n other sealer about so it's definitely water/air tight.
Click to expand...

my thoughts exactly, i've seen water get in to a standard air filter box..........
 
Heavy Breather said:
But there's some movement in em, you sure they don't come off?

yeh i knows i'm thick!!!!!!!!!!!
Click to expand...

I swear loads of people have asked this :doh:, they're just covers (which don't come off) to make the wheel nuts look nice and match the alloys. I'm sure if you go at them hard and long enough they'll come off, but don't!! Use as normal.
Rant over.
Welcome to the forum!:D

Luv Joe.
 
briandisco said:
It's not dumb Mate, just ignorance. I've got loads of ignorance so I should know :D

Brian
Click to expand...

:D Thats good cause i got loads more of these daft little probs to sort, i'll tackle em one at a time and prob never get to the end of em, just got my lights sorted (without any help):cool: next job a service........
 
well the photo shows where the air box was on a 300 see the holes where it was bolted down.
if you ain't got a filter in the snorkel then some cheapskate has fitted the snorkel using a fitting kit which is for a different snorkel than that fitted, some have a filter inbuilt and some connect to the existing airbox
 
Heavy Breather said:
But there's some movement in em, you sure they don't come off?

yeh i knows i'm thick!!!!!!!!!!!
Click to expand...
no m8 they don't come off they just cause strange bloody rattles which always seem to come from somewhere strange steering/suspension type of area. i spent 4 months looking for mine then found it by accident while doing some other work! if you have still got the alloys on then get a few (folks sell 'em new on ebay and replace the ones where the covers seem loose) and save a nightmare on a dark wet night in the middle of nowhere (that's always when i struggle to get me nuts off like!)
 
You must log in or register to reply here.

Similar threads

L
JLR Service ?????
Replies
6
Views
641
lightning
lightning
T
Td5 not starting - no air bleed valve?
Replies
3
Views
593
timothyarnold
T
F
need tips for air filter housing size reduction
Replies
1
Views
596
lynall
L
Lej
200/300tdi air filter mount
Replies
5
Views
807
dag019
dag019
JPaussie26
Land Rover wont Idle!
Replies
2
Views
974
marjon
marjon