Ewoke Member Jul 7, 2018 #1 Just had a set of BFGoodrich tyres and hubs fitted to my Landy and I’ve noticed the centre hole on the hub does not fit snuggly round the (I think it’s half shaft) could any one advise. I’ll put before and after pics Thanks for your help in advance Attachments image.jpg 330.5 KB · Views: 163 image.jpg 286.8 KB · Views: 155
Just had a set of BFGoodrich tyres and hubs fitted to my Landy and I’ve noticed the centre hole on the hub does not fit snuggly round the (I think it’s half shaft) could any one advise. I’ll put before and after pics Thanks for your help in advance
Ewoke Member Jul 7, 2018 #2 Ok after a quick google it’s down the hub centric / nut centric. So my next question is will it do any damage to my 90 if I keep the new wheels on
Ok after a quick google it’s down the hub centric / nut centric. So my next question is will it do any damage to my 90 if I keep the new wheels on
freelance Well-Known Member Jul 7, 2018 #3 You will need to tighten nuts with s torque wrench, so all studs have equal loading
Ewoke Member Jul 7, 2018 #4 freelance said: You will need to tighten nuts with s torque wrench, so all studs have equal loading Click to expand... What lb/ft would be reccomened
freelance said: You will need to tighten nuts with s torque wrench, so all studs have equal loading Click to expand... What lb/ft would be reccomened
Kwakerman Well-Known Member Jul 8, 2018 #5 Ewoke said: What lb/ft would be reccomened Click to expand... Attachments Screen Shot 2018-07-08 at 08.33.06.PDF 450.8 KB · Views: 138
