richieb

Active Member

• Nov 17, 2011

• #1

hi does anyone know if i have to remove the mud flaps to get the nsf wheel arch lining out or does it just slide behind it? the screws in the mudflap don't really look undoable!!!

 

j the range

New Member

• Nov 17, 2011

• #2

no i just took the linner out withoput taking off the mud flap

 

richieb

Active Member

• Nov 17, 2011

• #3

thank god, cos it looks like it's well behind the flap!!

 

j the range

New Member

• Nov 17, 2011

• #4

i took mine off to do the starter motor makes it easy haha..

 

richieb

Active Member

• Nov 17, 2011

• #5

it's front left that i want to remove so hope it's the same!

 

j the range

New Member

• Nov 17, 2011

• #6

yes both fit the same mate

 

richieb

Active Member

• Nov 17, 2011

• #7

cool shall rip em off tomo! and hope mine is not different to yours!!!:wtf:

 

S

sassanach

Well-Known Member

• Nov 17, 2011

• #8

thats interesting because i had to remove my mudflaps to get them off.

 

Dopey

Well-Known Member

• Nov 17, 2011

• #9

Me too, maybe if you have steps (i do) then you have to, without steps then you don't??

 

richieb

Active Member

• Nov 18, 2011

• #10

oh bugger i've got steps!!

 

Dopey

Well-Known Member

• Nov 18, 2011

• #11

The screws will be nicely rusted in now!! good luck

 

scotchgit

New Member

• Nov 18, 2011

• #12

ive got steps had to grind off screws for the bloody mud flaps to get liner out

 

Dopey

Well-Known Member

• Nov 18, 2011

• #13

sounds about right, use pop rivets to fix them in again, and just paint the rivets after, you wont notice them at all then

 

richieb

Active Member

• Nov 18, 2011

• #14

it had to come off but luckily only the top 2 screws,, just about came out and went back in!
made it alot easier to change the air spring,
it's sitting straight now!!

 

Dopey

Well-Known Member

• Nov 18, 2011

• #15

My back air spring were so bad even the steel reinforced wires had broken, they wern't leaking, but it wouldn't have been long I'm sure, just got them in time

 

richieb

Active Member

• Nov 18, 2011

• #16

haha down the bottom of the spring i took off it was just wire, all the rubber had rubbed off!!!
no wonder it had a leak!!!