K

Kaijun

Active Member

• Jul 5, 2023

• #1

Ask AI recommends moly grease, I am going to use copper grease for future in case. Do you use any lubricant and what lubricant do you use?

 

marjon

Well-Known Member

Full Member

• Jul 5, 2023

• #2

Do you mean the taper?

Nothing .

J

 

K

Kaijun

Active Member

• Jul 5, 2023

• #3

No, the contacts between ball joints and axle.

marjon said:

Do you mean the taper?

Nothing .

J

Click to expand...

No, the contacts between ball joints and axle.

 

marjon

Well-Known Member

Full Member

• Jul 5, 2023

• #4

Opps thought he was talking P38, I shouldnt stray into other sections I am a menace to myself

Edit again I wasn’t way wood in my advise, a little lube won’t hurt for installation.

J

 

Last edited: Jul 5, 2023

meego

Well-Known Member

• Jul 5, 2023

• #5

I’m confused What ball joints that contact the axle ??

 

tilly2

Well-Known Member

• Jul 5, 2023

• #6

Are you talking about the main body of the joint, the bit that gets pressed in

 

K

Kaijun

Active Member

• Jul 9, 2023

• #7

tilly2 said:

Are you talking about the main body of the joint, the bit that gets pressed in

Click to expand...

 

Last edited: Jul 9, 2023

K

Kaijun

Active Member

• Jul 9, 2023

• #8

Applogize for my confusing. Yes, maybe it is called axle yoke where ball joints are pressed in.

 

tilly2

Well-Known Member

• Jul 9, 2023

• #9

I just smeared mine with copper grease