hoopfish · Mar 4, 2013

Q 1
I have just booked my Disco 300tdi in for its mot next Monday and my question is this.I have lifted all carpets/sound proofing to have a look for metal worm.The boot pan is need of replacing,rusting through on the left and right hand side.I have a patch to do on the o/f side arch close to the rear seat belt mounting.I have got a couple of patches in both foot wells and drivers side just under gear selecter.A friend is doing the welding and says the boot is a days work and the patches another day.He can only spare 1 day before the mot.With the rear seats removed will it fail or will the front patches be more likely to fail?

Q 2
My horn is not working,purchased a new one.It is the old style with wires running through the steering column.I have cleaned contacts under the air bag.Any help with trouble shooting from steering wheel to horn please?:scratching_chin:

And breath......
Regards
Terry.

JonnyP · Mar 4, 2013

you wont fail the mot on the boot floor as its non structural. Get the seat belt mounts done first.

hoopfish · Mar 4, 2013

JonnyP said:
you wont fail the mot on the boot floor as its non structural. Get the seat belt mounts done first.

Thanks for reply,do the rear seat belt mounts need to be done if the rear seats have been removed?

Pikey · Mar 4, 2013

If you remove the seats it will be listed as having 2seats. which will invalidate your insurance.

Richard Martin · Mar 4, 2013

redhand said:
If you remove the seats it will be listed as having 2seats. which will invalidate your insurance.

Why will it invalidate the insurance? When I did the same thing the tester just put an advisory note on the MOT saying that no rear seats were fitted at the time of testing.

hoopfish · Mar 4, 2013

redhand said:
If you remove the seats it will be listed as having 2seats. which will invalidate your insurance.

Thanks redhand,so concentrate on getting the arch and footwells welded would be the answer?
Any help with getting the blooming horn working?

Pikey · Mar 4, 2013

wire it to an ordinary pushbutton .

hoopfish · Mar 4, 2013

redhand said:
wire it to an ordinary pushbutton .

:confused2: So any advice on how to do that? Im good with a spanner but pretty **** with auto electrics!

uncle albert · Mar 4, 2013

best I can say on this one is dont leave it untell one week befor mot to check things over, thats asking for problems.

JonnyP · Mar 4, 2013

https://www.youtube.com/watch?v=mBFEXeQlAek&playnext=1&list=PLB828AEF77C76B3C8&feature=results_main

The rear seat belt mounts go through the boot floor and are fixed to the chassis. Check under the car to see if they are ok..

hoopfish · Mar 4, 2013

uncle albert said:
best I can say on this one is dont leave it untell one week befor mot to check things over, thats asking for problems.

I agree uncle albert but running 3 vehicles and a business,2 kids and a wife leaves me little time to do stuff!.:violin:

hoopfish · Mar 4, 2013

JonnyP said:
https://www.youtube.com/watch?v=mBFEXeQlAek&playnext=1&list=PLB828AEF77C76B3C8&feature=results_main

The rear seat belt mounts go through the boot floor and are fixed to the chassis. Check under the car to see if they are ok..

Its the front mounts on arch that are questionable! the rear mounts are fine.
The rust has not reahed that far yet!.

livers · Mar 5, 2013

My 200 tdi passed with the biggest holes you have ever seen on the rear arches, I can live with that cos I will never carry a passenger in the back, and it lets the water back out

hoopfish

Well-Known Member

JonnyP

Well-Known Member

hoopfish

Well-Known Member

Pikey

Dummy Ejection Facilitator..

Richard Martin

Well-Known Member

hoopfish

Well-Known Member

Pikey

Dummy Ejection Facilitator..

hoopfish

Well-Known Member

uncle albert

New Member

JonnyP

Well-Known Member

hoopfish

Well-Known Member

hoopfish

Well-Known Member

livers

Well-Known Member

Similar threads