D

dalodav

New Member

• Nov 29, 2009

• #1

I have an Mreg P38
The 3 lights on the dash stay on "ABS..BRAKES..TC."
I have to pump the brakes to slow the car down.
Checked brake fluid and all is ok.
Any ideas please.

 

D

daveb284

New Member

• Nov 29, 2009

• #2

Sounds Like your ABS is a t fault, it may not be pressurising the accumalator.
Does the motor run when you first turn the key?

 

D

dalodav

New Member

• Nov 29, 2009

• #3

Not sure where to look or listen to motor
Sorry

 

D

dalodav

New Member

• Nov 29, 2009

• #4

Just checked... No noise at all.

 

Khryztal

New Member

• Nov 29, 2009

• #5

Brakes. Brakes. You posh bugger. :lol:

 

S

ssmn1234

Active Member

• Nov 29, 2009

• #6

dalodav said:

I have an Mreg P38
The 3 lights on the dash stay on "ABS..BRAKES..TC."
I have to pump the brakes to slow the car down.
Checked brake fluid and all is ok.
Any ideas please.

Click to expand...

Stuff that! hope you is going everywhere very very slowly.

 

gemsdad

NOT BOTHERED.

• Nov 29, 2009

• #7

ssmn1234 said:

Stuff that! hope you is going everywhere very very slowly.

Click to expand...

he better had be,other wise he might run over the butler or one of the other servants.

 

classic kev

Well-Known Member

• Nov 29, 2009

• #8

dalodav said:

I have an Mreg P38
The 3 lights on the dash stay on "ABS..BRAKES..TC."
I have to pump the brakes to slow the car down.
Checked brake fluid and all is ok.
Any ideas please.

Click to expand...

All sorts of possibilities. Pump, pressure switch, dicky relay.

Might be best to go and get it plugged in so you know where to start looking. I don't know that you can get a blink code out of the system on a P38 in the same way you can on an RRC but I'm sure somebody who knows will let you know in due course.

 

D

daveb284

New Member

• Nov 29, 2009

• #9

Your ABS pump motor isnt running, check the fuses for it. If they are ok, then could be knackered

 

C

Cossie David

New Member

• Nov 29, 2009

• #10

Relay 17 make sure thats ok.