jamesmartin
Well-Known Member
pressure regulator cant be disconnected ,but any vacuum pipe or connection on ram pipe housing can be used
alexdon
Active Member
Thanks Discool
I have the FPR connected to the plenum at the moment, but this other pipe bugs me, I'm wondering if there should hsve been a T-piece. I can't find anyone else who has the switch. It is in Microcat and Rave so it's not something that's been added.
James
I can't find another connection.
I have the FPR connected to the plenum at the moment, but this other pipe bugs me, I'm wondering if there should hsve been a T-piece. I can't find anyone else who has the switch. It is in Microcat and Rave so it's not something that's been added.
James
I can't find another connection.
Last edited:
jamesmartin
Well-Known Member
its not a standard part ,been fitted with lpg kit presumably to cut coolant to heater but wouldnt think it necessary theres enough heat in cold water to vapourise gas,there are other connection on ram pipe housing and adpters available as lr part, also vac feeds near throttle cables for cruise control ,would have gone to t piece
alexdon
Active Member
I think I have found the answer!!
I assumed it was a standard part as it is in Rave (see pic). But the Rave section on heating does not differentiate between engines, I think that this valve was only fitted to Mpi engines, can any one confirm this? If this is the case I shall probably remove it, I bought plenty of hose when I was changing the head gaskets.
I assumed it was a standard part as it is in Rave (see pic). But the Rave section on heating does not differentiate between engines, I think that this valve was only fitted to Mpi engines, can any one confirm this? If this is the case I shall probably remove it, I bought plenty of hose when I was changing the head gaskets.
Attachments
jamesmartin
Well-Known Member
definately not fitted to v8 or 300 tdi
