Thats Bollocks
Active Member
Remove it.
not all p38,s had them fitted, so if its not there then it cant fail!
not all p38,s had them fitted, so if its not there then it cant fail!
Hi People,
Got a problem and I hope you can pull it out of the bag again! MOT tomorrow and the high level stop lamp not working. Don't know if this is a new problem. Any suggestions?
Thanks
Bill
Just tell them it's not connected. If it works at all 50% of the bulbs must light. If it does not work tell them it's not connected and they have to pass car as long as other two work.
Last edited:
enery8
Active Member
Failed MOT. stop light okay, thanks for the info Thats Bollocks, Oil Dripper and Wammers.
Failed on front radius arm bushes, corroded brake pipes and a leak in the exhaust.
Local Landy specialist could not find the exhaust leak, radius arm bushes deterioration and the brake pipes are border line.
Anyway, I am going to change the brake pipes for copper tubing and get the bushes ordered so my indy can fit them.
Really, not too bad all in all, could have been a lot worse.
thanks again chaps
Bill
Failed on front radius arm bushes, corroded brake pipes and a leak in the exhaust.
Local Landy specialist could not find the exhaust leak, radius arm bushes deterioration and the brake pipes are border line.
Anyway, I am going to change the brake pipes for copper tubing and get the bushes ordered so my indy can fit them.
Really, not too bad all in all, could have been a lot worse.
thanks again chaps
Bill
