D

discoboy84

New Member

• Dec 13, 2009

• #1

how much do you guys reacon it'll cost to repair O/S inner wing and battery tray on my disco

my welder charges £25 an hour?

 

The Mad Hat Man

Well-Known Member

LZIR Despatch Agent

• Dec 13, 2009

• #2

how much is a year and a half?

 

V8_Disco

New Member

• Dec 13, 2009

• #3

discoboy84 said:

how much do you guys reacon it'll cost to repair O/S inner wing and battery tray on my disco

my welder charges £25 an hour?

Click to expand...

a bit more info might be uselfull

 

andyb66

Well-Known Member

• Dec 14, 2009

• #4

discoboy84 said:

how much do you guys reacon it'll cost to repair O/S inner wing and battery tray on my disco

my welder charges £25 an hour?

Click to expand...

Does depend on how much rust there is, do you want a replacement panel or a patch up job.

Last 'patch up job' I did, was about £150-ish a side for inner wings, battery box, footwell and around front lights.

 

[JP]

New Member

• Dec 14, 2009

• #5

After spending 2 months welding loads of rust on my disco and doing the inner wings, if I had to do it again, I would charge 300quid! lol

 

si844

New Member

• Dec 14, 2009

• #6

it cost me £40 for secondhand mig welder and £10 for sheet steel. i needed to do the inner wings on my vauxhall few years ago, with no experience at all. was good enough for mot. after a bit of practise my disco wings look quite good.

 

vivnap

Banned

• Dec 14, 2009

• #7

reckon £150 is a fair price for a decent job. i would expect £200 for a job like the one ive just done on mine.

 

Attachments

• 
  ds headlite panel.jpg

  190.2 KB · Views: 1,073
• 
  ds headlite panel remove.jpg

  194.5 KB · Views: 1,031
• 
  dsf laq4.jpg

  223.4 KB · Views: 2,372
• 
  dsf laq2.jpg

  232 KB · Views: 1,079
• 
  dsf rot.jpg

  160.8 KB · Views: 1,062
• 
  dsf cut rot.jpg

  206 KB · Views: 1,191
• 
  ds inner clear.jpg

  169.7 KB · Views: 2,013

si844

New Member

• Dec 15, 2009

• #8

tis a nice tidy job that is vivnap

 

B

Beast o Bodmin

Banned

• Dec 15, 2009

• #9

[JP];930608 said:

After spending 2 months welding loads of rust on my disco and doing the inner wings, if I had to do it again, I would charge 300quid! lol

Click to expand...

found some a-pillar replacement bottoms .lower hinge area.Do you want?

Shed is clearer too...

 

B

Beast o Bodmin

Banned

• Dec 15, 2009

• #10

easier to wack in new inners lagged with oil.

 

vivnap

Banned

• Dec 16, 2009

• #11

si844 said:

tis a nice tidy job that is vivnap

Click to expand...

thanks, dont like bodge jobs
this discovery has been given a right good going over, reckon its now one of the better ones
new inner and outer sills both sides, new boot floor every bit of rot i could find cut out and welded using new panels.

 

Attachments

• 
  new rail.jpg

  224 KB · Views: 892
• 
  bearers.jpg

  230.8 KB · Views: 840
• 
  boot floor sealed.jpg

  238 KB · Views: 1,089
• 
  rs boot.jpg

  220.1 KB · Views: 861
• 
  boot basecoat.jpg

  141.9 KB · Views: 724
• 
  boot floor laq.jpg

  237.7 KB · Views: 1,040

trax99

Well-Known Member

• Dec 16, 2009

• #12

Sweet,
thought I'd done a tidy job but yours is much nicer

 

trax99

Well-Known Member

• Dec 16, 2009

• #13

As for you discoboy, i reckon your best bet is to pick up a mig and get a new inner wing/battery tray panel - i got mine from YRM metal solutions on ebay, pretty cheap ( £60 ish) for both wings and went in with minimal trimming, only had to learn to puddle weld as well (yay !!)

 

D

discoboy84

New Member

• Dec 24, 2009

• #14

i have a MIG (gasless crap) need some pratice and yes YRM is looking like the place for a whole inner wing, i need a battery tray too though

 

si844

New Member

• Dec 25, 2009

• #15

discoboy84 said:

i have a MIG (gasless crap)

Click to expand...

thats wot i got too, does the job tho - just. (easy to burn through metal as theres hardly any adjustment).
i'v patched up quite a few inner wings, battery trays, boot floors, and exhausts with mine.

 

thebiglad

Well-Known Member

• Dec 25, 2009

• #16

vivnap said:

thanks, dont like bodge jobs
this discovery has been given a right good going over, reckon its now one of the better ones
new inner and outer sills both sides, new boot floor every bit of rot i could find cut out and welded using new panels.

Click to expand...

Hi vivnap, you've done some real quality work on that Disco, especially the front end battery tray area, very nice indeed. You must be pleased with that?

 

The Mad Hat Man

Well-Known Member

LZIR Despatch Agent

• Dec 25, 2009

• #17

here is some info and pics....

 

vivnap

Banned

• Dec 25, 2009

• #18

thebiglad said:

Hi vivnap, you've done some real quality work on that Disco, especially the front end battery tray area, very nice indeed. You must be pleased with that?

Click to expand...

yea im pleased with it but if i was doing it inside a workshop i could have made a lot better job of it. i wont have a workshop untill later on next year when i get it built

working out doors isnt the ideal way to do repair work cos the british weather just isnt on your side