RAZ8550TDI
New Member
you did buster, was just with me being told to use another pipe and was wondering why my boost gauge was only reading half bar instead of 1.2 and took ages to get onto boost hehe!
cheese_aholic
New Member
Guys - I know it's a while ago now but any chance you could post pictures of the pipe that you tee'd the boos gauge into please?
I think I know which one from the discussion, but could do with the photographic evidence so to speak...
Cheers
I think I know which one from the discussion, but could do with the photographic evidence so to speak...
Cheers
bustersbus
Well-Known Member
If ye did a search, ye might've found this...
http://www.landyzone.co.uk/lz/f41/fitting-turbo-gauge-60825.html
cheese_aholic
New Member
Thanks - was looking under Boost Gauge (not Turbo Gauge).
Someone else directed me to this thread (after much abuse!) but got there in the end!
Thanks for your help...
Someone else directed me to this thread (after much abuse!) but got there in the end!
Thanks for your help...
cheese_aholic
New Member
Thanks MHM - I'll tune in after 9 for the real action and ritual humiliation!
No hard feelings I hope......
No hard feelings I hope......
nope - but .....
1) always search - then tell us if yu aint found out - it stops the :search: posts.
2) dont slag orf those trying to help
3) dont slag orf the forum.
4) thick skin also reqd.
1) always search - then tell us if yu aint found out - it stops the :search: posts.
2) dont slag orf those trying to help
3) dont slag orf the forum.
4) thick skin also reqd.
