jorjio_k said:

Hello gents;
there is something wrong in the t/box,when i shift the lever into low range it flashes for a couple of seconds then low is selected with the audible smooth clunck underneath,then when i put it in 4 or 3 or 2 or 1 whatever,i get the select neutral.when i put it in R there is no select neutral.
only in forward low gears it shows select neutral,then when i select it there is a hard clunck/tap from beneith and the high range engages while the lever is in the low range.
i have swapped the ecu still the same,replaced the xy pannel still the same,it is engaging in low and high,and low is only working on reverse.
what is left the motor?

Click to expand...

jorjio_k said:

Damn it,since o got this blood sucker p38 and nothing but bad wirings,the srs before,the fuse box,the becm,interior lights and the list goes on.now the t/box wirings,onother whole day at the garage to trace a fooked wire,there goes the console again in and out hundred times.

Click to expand...

Irishrover said:

:clap2::clap2: Good man jorjio....Nice to see someone posting fixes that will be stored in the database which not many people can be bothered to search. They would rather take the easy way out and put a new post up 'cos it's easier !!!
Rant over.....:frusty:

Click to expand...